Legacy Railsounds Sequence Control - Lionel LEGACY 4-4-0 Owner's Manual

LEGACY RailSounds Sound System operations

LEGACY RailSounds Sequence Control

Y
our LEGACY-equipped locomotive features Sequence Control. Based on the movement and speed
of the locomotive, Sequence Control automatically plays the sound effects of an entire trip, from
departure to destination, while you run your locomotive. Prototypical whistle signals, bell, and radio
chatter are added automatically as you spin your throttle—no need to memorize a sequence of but-
ton presses.
To activate the Sequence Control feature, press and hold the AUX1 button for three seconds.
You'll hear a unique bell/whistle signal, indicating that Sequence Control is now enabled. Release the
AUX1 key when you hear the sound.
Now, radio chatter, air brake release, and warning signals will play automatically as you move
out, reach cruising speed, and then decelerate for arrival, as illustrated in Figure 8. Plus, you can still
activate CrewTalk communication and TowerCom announcements using your remote.
To discontinue Sequence Control, you must tap AUX1, and then tap the 0 key or the RESET
button. Cycling track power off and back on also turns of Sequence Control mode.
During sequence control mode operation, speed step 1 is used to trigger departure effects
Note!
such as air brake release and departure whistle. Therefore your engine will not begin
moving until speed step 2 and the Roll Mode button will bring your engine to a stop while
Sequence Control mode is enabled. For the most realistic operation, medium or high
momentum is recommended when using Sequence Control.
SEQUENCE CONTROL
ENABLED (hold AUX1 for 3
seconds) - Ding-ding-toot!
STOP - Bell
off. "We are in
position."/
"Copy.".
Figure 8. LEGACY RailSounds automatic Sequence Control
Automatic Sequence Control
The actual dialog will vary.
AT A STOP, after a long
pause - "Dispatcher, we
have a clear signal."/ "Roger
that."
SLOW BELOW
SLOW BELOW 1/3 THROTTLE -
1/8 THROTTLE -
Whistle arrival signal. "We are
Bell on.
arriving,"/ "Roger."
THROTTLE UP TO STEP
1 - Air brakes release,
RPMs up, departure
whistle.
22
THROTTLE UP TO STEP
2+ - Bell on. "Train is
moving."/"Copy.".
1/8 THROTTLE -
Bell off.
1/3 THROTTLE -
Whistle signal (in
transit.).
3/4 THROTTLE - Crossing
signal "We are at
maximum authorized
speed.".