The manual disinfection of device surfaces was
tested with various agents. At the time of
testing, the following disinfectants showed good
material compatibility and effectiveness:
1. Quaternary ammonium compounds
1.1 Mikrozid® sensitive liquid 1)
1.2 Mikrozid® alcohol free liquid 1)
1.3 Mikrozid® sensitive wipes 1)
1.4 Mikrozid® alcohol free wipes 1)
1.5 acryl-des® 1)
1)
limited virucidal
The composition of the disinfectant is the
responsibility of the manufacturer and can
change over time.
NOTE
The user must make sure to observe the
manufacturer's information on the disinfectant
exactly.
• Wipe the surfaces of the profiles of BHU as
well as its components with a cloth moistened
with disinfectant.
Do not allow any fluid to penetrate the terminal
units and electrical components.
DRAEGER does not take on a responsibility
for the use of other disinfectants.
Visual inspection
• Check all items for damage and external
signs of wear, such as cracking,
embrittlement, or pronounced hardening, and
residual dirt.
18