Table of Contents
Advertisement
BIOGAS 5000 Gas Analyzer
4) The operator will return to the 'User settings' menu.
Note:
The manually set contrast setting is retained when the read-out is switched
off and may require resetting when next switched on.
7.3.5
Adjust volume
This option enables the operator to adjust the volume for the internal
speaker, for example the alarm tone. A lower setting will help preserve the
battery power.
1) Select the 'Menu' button on the front of the analyzer to display the 'Device Settings'
menu. Press the soft-key to display 'User Settings'.
2) Select 'Key 5 – Adjust Volume' and the following screen is displayed:
Figure 11—Adjust Volume
3) Manual adjustment of the volume is available via this option and can be carried out with
use of 'Key 4 - Scroll left' (
4) Select the soft-key 'Save' to store the setting or select soft-key 'Exit' to exit the screen
without saving the change.
5) The operator will return to the 'User settings' menu.
7.4
Operation settings
To access the 'Operation settings' menu, select the 'Menu' key on the front of the analyzer to
display the 'Device Settings' menu followed by the soft-key to display the 'Operation Settings'
menu. The following menu is displayed:
) volume down and 'Key 6 - Scroll right' (>) volume up.
5K-MNL-BIOGAS5000
Page 33
Advertisement
Table of Contents
