Table of Contents
Advertisement
5K-MNL-BIOGAS5000
date and version number when contacting LANDTEC.
Note:
GA5K mode is reserved for future applications.
4)
Select soft-key 'Exit' to exit the screen and return to the 'Device Settings' menu.
7.2.4
Space has been left for a future feature
1)
Select the 'Menu' key and the 'Device Settings' menu is displayed.
2)
The 'Key 4' has been reserved for future functionality.
7.2.5
Navigation (optional)
This option enables the operator to switch the 'GPS Navigation'
functionality on or off. (This is optional and dependent upon
purchasing the navigation option). The power on self-test screen will
display "GPS" in the enabled options screen if the analyzer has been
fitted with GPS
1) Select the 'Menu' key and the 'Device Settings' menu is displayed.
2) Select 'Key 5 – Navigation On' to switch on the GPS navigation functionality or
'Key 5 – Navigation Off' to switch the GPS navigation functionality off.
Note:
For further information please refer to section '8.0 – Taking Readings'
1)
Select soft-key 'Next' to display the next screen, 'Previous' to return to the previous
screen, or select soft-key 'Exit' to exit this screen and return to the 'Device Settings'
menu.
Note:
For further information please contact Technical Support at LANDTEC at
7.3
User settings
To access the 'User settings' menu, select the 'Menu' key on the front of the analyzer to
display the 'Device Settings' menu followed by the soft-key to display 'User Settings' menu.
The following menu is displayed:
Page 30
The Comms setting 'Legacy' mode is for use with LSGAM software.
+1 (734) 995-2547 or email service@qedenv.com.
BIOGAS 5000 gas analyzer
Advertisement
Table of Contents
