Units Of Measurement; Select By Route/Group (Requires Lsgam); Adjust Backlight - QED BIOGAS 5000 Operating Manual

5K-MNL-BIOGAS5000
3) To exit this option, select the soft-key 'Exit' and the operator is returned to the 'User
Settings' menu.
7.3.2

Units of measurement

Units of measure are controlled through the LSGAM Software and cannot be
directly changed on the Analyzer. This protects from the potential storing
of different units of measure for the same project.
7.3.3

Select by route/group (requires LSGAM)

This is a future enhancement option to enable the operator to display IDs by
group or by specific route which have been uploaded from LANDTEC System
Gas Analyzer Manager (LSGAM) software to the instrument.
7.3.4

Adjust backlight

This option enables the operator to adjust the backlight (brightness).
Having this set to a darker setting will help preserve the battery power
1) Select 'Key 4 – Adjust Backlight' and the following screen is displayed:
Figure 10—Adjust backlight
2) Manual adjustment of the instrument backlight is available via this option and can be
carried out with use of 'Key 4 - Scroll left' (
3) Select the soft-key 'Save' to store the setting or select soft-key 'Exit' to exit the screen
without saving the change.
Page 32
BIOGAS 5000 gas analyzer

) darker and 'Key 6 - Scroll right' (>) lighter.