Operator Settings; Menu Key; Device Settings; Date And Time - QED BIOGAS 5000 Operating Manual

BIOGAS 5000 Gas Analyzer
7.0

Operator settings

7.1

Menu key

The 'Menu' key enables the operator to select options to set up specific
parameters and perform operational tasks prior to sample readings being
taken or to view data and information stored in the instrument.
1) Select the 'Menu' key on the front of the analyzer and the following screen is displayed:
Figure 4—Device Settings
2) Press the relevant numeric key on the analyzer keypad to select the required option.
3) To exit this menu, select the soft-key 'Exit' on the front of the analyzer and the operator
is returned to Main Gas Read Screen.
7.2

Device settings

7.2.1

Date and time

This option enables the operator to set the instrument date and time or to
receive and update the settings automatically from satellite signal.
1) Select the 'Menu' key on the front of the analyzer to display the 'Device Settings' menu
followed by 'Key 1 – Date and Time' and the following screen is displayed:
5K-MNL-BIOGAS5000
Page 27