Table of Contents
Advertisement
1.4
DMX CONTROL
The MAGICFX
STADIUMSHOT III is controlled with 1 enable adress and 1 operational
®
address.
DMX Address
Enable address
Start address (Trigger)
The enable address cannot be the same as the operational address. Operating of
these addresses results in the following:
DMX Address
Enable address
Start address
(Trigger)
When you link multiple machines with DMX, we advise you to use the same enable
address for all machines.
CAUTION
1.5
DISPLAY PANEL
DMX/RDM SETTINGS
CONFIGURATION
The display panel is located on the backside of the MAGICFX
Check the following menu structure for all options in the menu. Use the buttons for
navigation and selection. The left-hand LED blinks red when DMX is active. The right-
hand LED continuously lights red when an error is present.
8
MAGICFX
STADIUMSHOT III — User and Installation Manual
®
DMX Value (decimal)
0
99
100
154
155
255
0
199
200
255
Always plug in a DMX Terminator into the DMX output of the final
unit in the control sequence. Using a DMX Terminator improves
signal reliability.
Address range
1 – 512
1 – 512
DMX addresses
Result
Device disabled
Device enabled
Device disabled
No output
Fire
Operation of the DMX addresses
INFORMATION
ERROR HISTORY
Display panel
STADIUMSHOT III.
®
Advertisement
Table of Contents
