Advertisement
Long-term storage
Follow these instructions only after all clean-up steps have been performed.
1. Fill a cup or other container with separating oil (approx. 2 ounces) supplied
with the unit and submerge the inlet valve into the oil.
2. Place a rag over the spray hose port and turn the switch ON (l). When the
oil has been sucked from the cup, turn the pump OFF (O).
3. Wipe the entire unit, hose, and gun with a damp cloth to remove accumu-
lated paint. Replace the high-pressure hose to the paint hose port.
https://www.XPOtool.com
The Tool Experts
Item 63003
Separating
oil
Page 20
01
2022-1
Advertisement
