Advertisement
5. Unclip the return tube from the suction tube
and place it into the waste container. Turn the
PRIME/SPRAY knob to PRIME.
7. Place the original material container next to the
waste container. Aim the spray gun into the side
of the original material container and hold the trig-
ger.
9. When cleaning solution comes from the spray
gun, keep holding the trigger and aim the spray
gun into the side of the waste container.
10. Trigger the gun until the fluid coming out of the
gun is clear. You may need to empty the waste
container and continue flushing.
11. Turn the PRIME/SPRAY knob to PRIME and
trigger gun once more to relieve pressure.
https://www.XPOtool.com
The Tool Experts
6. Turn water supply on. Turn the pump ON (l). Wa-
ter will flow into the suction tube and out through the
return tube. Let the pump run for a few minutes to
allow the return tube to be completely flushed.
Leave pump running during steps 7 and 8.
8. While pulling the trigger, turn the PRIME/SPRAY
knob to SPRAY to purge material from the hose
back into the original container.
Keep holding trigger through next steps.
Spray into waste container
Spray material into original container
Move on to "Cleaning the spray gun compo-
Item 63003
nents".
01
Page 15
2022-1
Advertisement
