Advertisement
Clean-up – cleaning the suction set
1. Lock the gun and turn the pump OFF (O).
3. When the suction set is clean, thread the suc-
tion tube back into the inlet valve, and replace
the return tube onto the return tube fitting. Re-
place clip.
5. Turn the PRIME/SPRAY knob to PRIME.
Turn the pump ON (l), and trigger the gun once
into a waste container to relieve pressure.
https://www.XPOtool.com
The Tool Experts
2. Remove the suction hose and the return tube
and clean it using the appropriate cleaning solu-
tion. You should also wipe the threads of the inlet
nut (a) and remove and clean the solution set inlet
filter.
4. Submerge the suction set into a bucket of NEW
cleaning solution.
6. Let the pump circulate cleaning solution through
the suction set for 2–3 min. Turn the pump OFF.
Note!
In case you have used oil-based mate-
rial, you must flush the pump again with water
to prepare it for storage.
Move on to "Cleaning the spray gun compo-
Item 63003
nents."
Page 17
01
2022-1
Advertisement
