Advertisement
Clean-up – cleaning the spray gun components
1. Make sure that the pump is switched OFF (O).
Make sure that the PRIME/SPRAY knob is turned
to PRIME. Unplug the sprayer.
3. Remove filter from spray gun (refer to "Clean-
ing the spray gun filter").
5. Re-install gun filter tapered-end first. Reas-
semble spray gun.
7. Thread the spray gun back onto the paint hose.
Tighten with a wrench.
https://www.XPOtool.com
The Tool Experts
2. Remove spray gun from the paint hose using
adjustable wrenches.
4. Remove spray tip (a) from spray guard assem-
bly. Clean spray tip with a soft-bristled brush and
the appropriate cleaning solution. Be sure to re-
move and clean the washer (b) and saddle
seat (c) located in the rear of the spray guard as-
sembly.
6. Install spray tip (a), saddle seat (c), and
washer (b), and replace spray guard assembly.
Item 63003
Page 18
01
2022-1
Advertisement
