WilTec 62567 Operation Manual
  1. Manuals
  2. Brands
  3. WilTec Manuals
  4. Paint Sprayer
  5. 62567
  6. Operation manual

WilTec 62567 Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Operation Manual
Paint Sprayer
62567
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignific -
antly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

Advertisement

Table of Contents
loading

Related Manuals for WilTec 62567

Summary of Contents for WilTec 62567

  • Page 1 Operation Manual Paint Sprayer 62567 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignific - antly.
  • Page 2 All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.

  • Page 3: Safety Instructions

    An earthed body increases the risk of electic shock Do not expose the device to rain or environments with high levles of humidity.  Water or moisture entering the device greatly increases the risk of electric shock. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 3 http://www.WilTec.de http://www.aoyue.eu...
  • Page 4 Always make sure to store this device in a location inaccessible to children and do not  let individuals unfamiliar with the device or this operation manual operate it. This paint sprayer can be dangerous, if used by an inexperienced user. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 4 http://www.WilTec.de http://www.aoyue.eu...
  • Page 5 Do not use the pain sprayer with asbestos, metallic paint, glass, minium, powdered chalk, bleach or abrasive, granular or calciferous colours. The paint sprayer is not intended for processing these materials and might be damaged in the process. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 5 http://www.WilTec.de http://www.aoyue.eu...
  • Page 6 Remove the nozzle or set it to its cleaning position before cleaning or rinsing the device. Do not use pliers to fasten or loosen high pressure connections. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 6 http://www.WilTec.de...
  • Page 7 In order to reduce the pollution caused by these chemicals, ensure to work in a well- ventilated area and always use authorized safety equipment such as specially designed dust masks capable of filtering microscopic particles. Always keep this operation manual! © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 7 http://www.WilTec.de http://www.aoyue.eu...
  • Page 8 Do not use worn or damaged extension cords and instead have them be replaced or repaired by a qualified electrician. Do not expose extension cords to sharp edges or objects, heat, moisture or moist environ-  ments. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 8 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
  • Page 9 381 cm (150') to nameplate 0 – 2.0 2.1 – 3.4 3.5 – 5.0 5.1 – 7.0 7.1 – 12.0 12.1 – 16.0 16.1 – 20.0 © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 9 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
  • Page 10 Familiarise yourself with the device before beginning its operation © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 10 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...

  • Page 11: Mode Selector Switch

    The nozzle can be turned and removed in order to facilitate the process of cleaning and clearing pos - sible obstructions. The nozzle can be switched between spray and eject position. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 11 http://www.WilTec.de...
  • Page 12 Attach the hose to the spray gun and tighten the fix the connection with 2 wrenches. Set the pressure control button to low pressure spray mode. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 12 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...

  • Page 13: Pressure Relief

    Use the mode selector switch in order to set the device to prime mode. Direct the spray gun at a paint bucket and press the trigger in order to release the pressure. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 13 http://www.WilTec.de...
  • Page 14 Warning! In order to decrease the risk of fire, the spray gun should make contact with an earthed metal object when the white spirit is applied. Water-based (latex) paint: Rinse the spray gun with warm and clear water. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 14 http://www.WilTec.de http://www.aoyue.eu...
  • Page 15 Place the suction pipe inside a container filled with water or solvents.  Use the mode selector switch in order to set the device into the aspiration mode.  © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 15 http://www.WilTec.de http://www.aoyue.eu...
  • Page 16 The paint sprayer will start pumping and thereby purge the system from residue water/solvent  as well as air bubbles. Let the residue run into the bucket for 30 to 60 seconds, before then turning the device off. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 16 http://www.WilTec.de http://www.aoyue.eu...
  • Page 17 Point the spray gun and activate it by pressing the trigger. Set the mode selector switch to spray mode and continue spraying into the bucket.  © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 17 http://www.WilTec.de...
  • Page 18 A. Once the priming process has been completed, set the nozzle to spray position. B. Start spraying with the lowest pressure setting. If necessary, slowly increase the pressure by turning the pressure control button clockwise in order to create a sufficient spray pattern. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 18 http://www.WilTec.de...

  • Page 19: Spray Techniques

    Abide by the following instructions, in order to successfully clean the nozzle. Turn turn the device off and lock the spray gun trigger by using the release lock.  Set the nozzle to cleaning position.  © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 19 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
  • Page 20 Once again turn the device on.  Unlock the trigger by releasing the release lock.  Spray into a bucket until the obstruction has been removed.  © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 20 http://www.WilTec.de http://www.aoyue.eu 2020-1...
  • Page 21 Release the pressure and remove the pipes of the device from the paint. Drain the remaining  paint from the device by holding the pipes over the paint bucket. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 21 http://www.WilTec.de http://www.aoyue.eu...
  • Page 22 Place the intake pipe inside an empty bucket.  Place the suction pipe inside a bucket filled with water or solvent.  Carefully remove the nozzle head from the spray gun.  © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 22 http://www.WilTec.de http://www.aoyue.eu 2020-1...
  • Page 23 Set the mode selector switch to spray mode.  Turn the device on.  Spray the paint into the paint bucket.  © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 23 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
  • Page 24  Continue to spray until the spray gun releases a clear stream.  Release the trigger, turn the device off and release the pressure from the system.  © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 24 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
  • Page 25  Remove the filter from the spray gun.  Thoroughly clean the parts of the spray gun with soap water or mild detergents and a brush.  © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 25 http://www.WilTec.de http://www.aoyue.eu 2020-1...
  • Page 26 Place the device upside-down and remove the brackets from both pipes, before then discon- necting the same from the paint sprayer. Insert a 1 gram of mild oil or pump storage liquid into every intake. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 26 http://www.WilTec.de...
  • Page 27 Turn the pressure control button to its lowest pressure setting. Place a piece of cloth in front of the hose outlet. Turn the device on and let it run for 5 seconds before turning it off again. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 27 http://www.WilTec.de...
  • Page 28 Clean the paint sprayer with a clean piece of cloth and store it in a clean and dry environment. Make thereby sure that it stays inaccessible to children at all times. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 28 http://www.WilTec.de...

  • Page 29: Troubleshooting

    3. Material structure is too rough paint. 3. Roughen the surface with a thinner be- fore then sanding it and removing remnants sticking out from the surface. © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 29 http://www.WilTec.de http://www.aoyue.eu 2020-1...

  • Page 30: Parts List

    Middle gear bushing Pin 5x10 Label Hex bolt (M5x15) Pressure knob Elastic washer 5 Label Pump body Pressure control bolt (M4x8) Pin (3x15) Pin A Motor assembly © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 30 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
  • Page 31 Steel sphere (Ø6.35) Oil ring Seal seat Washer Pusher Sealing ring Shield O-ring (14x2.65) O-ring (2.6x1.8) Sealing ring Sealing ring O-ring (22,4x1,8) Seal washer Copper guide bushing Spring © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 31 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...
  • Page 32 © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 32 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...

  • Page 33: Technical Specifications

    5-40°C Hose 10 m Weight in kg Empty: 7 kg (entire set) Accessories 1 x Paint spraying system 1 x Paint sprayer 1 x High-pressure hose © by WilTec Wildanger Technik GmbH Artikel 62567 Seite 33 http://www.WilTec.de http://www.aoyue.eu 2020-1 http://www.teichtip.de...

  • Page 34: Disposal Regulations

    All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.

  • Page 35: Eg-Konformitätserklärung

    It has been tested with the following harmonised standards: Il a été testé à partir des norms harmonisées suivantes: EN 60335-1 :2012+A11 :2014 EN 62233 :2008 Bevollmächtigter für die Zusammenstellung der technischen Unterlagen: Bernd Wildanger, Geschäftsführer WilTec Wildanger Technik GmbH Königsbenden 12 52249 Eschweiler Deutschland Eschweiler, 29. Dezember 2015...

Table of Contents