Kodak RP 30 Operator's Manual page 98

Changes in the parameters shifts the printed results into one direction. For this
reason, only experienced operators should modify parameters.
The settings influence all orders.
Modifications are only effective after a new start.
These settings are not considered in the backprint as the productions balance
defines the basic balance (0-value). Correction values entered later (for example,
by way of correction configurations or for image improvement) are added to this
0-value (up to ± 9 maximum) and can be included in the backprint. For color and
density corrections, the weighing depends on the entered correction impact (see
Impact).
IMPORTANT: Always leave all parameters in the production balance on 0. Define
KODAK PROFESSIONAL RP 30 Laser Printer
necessary corrections only by way of the correction configurations,
which also lets you select the set values for the backprint.
Settings
4-31