Kodak RP 30 Operator's Manual page 209

CAUTION:
2. Clean the squeegee unit and V wipers.
a. Clean the rollers of the squeegee unit with a soft brush.
b. Clean the paper guide surfaces of the squeegee unit and the holder with a
3. Reinstall the holder of the V wiper and let it snap in.
4. Rinse the crossovers again in running water before mounting them.
NOTE:
KODAK PROFESSIONAL RP 30 Laser Printer
Do not damage the wiper edges of the V wiper. Check for
damage.
lint free cloth.
Observe the attached color markings / numbering when reinstalling the tank
crossovers and the squeegee unit. Check that the latches of the units snap in
and are flat against the housing.
Maintenance
8-17