Cleaning The Filters In Astor And Water Inlets - Kodak RP 30 Operator's Manual

Cleaning the Filters in ASTOR and Water Inlets

IMPORTANT:
1. Close the drain valves on the top of the 3 inlets.
2. Unscrew the cap nuts (1 and 2) and carefully remove them.
NOTE:
3. Remove the filters and rinse them in running water.
4. Reinstall the filters.
IMPORTANT:
5. Open the drain valves again.
KODAK PROFESSIONAL RP 30 Laser Printer
Close the water tank cover (3) before beginning this procedure.
The cap nuts are full of liquid.
Do not mix up the ASTOR filters with the water filters.
1
2
ASTOR
Water
Maintenance
8-19