Paper Transport At The Bottom - Kodak RP 30 Operator's Manual

Paper Transport at the Bottom

With the print engine pulled out:
1. Actuate the two levers (1) and open the locking mechanism.
2. Pull out the transfer unit towards you.
3. Open the levers (2) and hold against the unit as the bottom part of the transport
releases.
4. Pull the flap (3) up and slowly lower the bottom part.
CAUTION:
KODAK PROFESSIONAL RP 30 Laser Printer
When you return the flap (3) to the operating position, it must be
flush to the side of the transport before you close the lever (2).
Correcting System Conditions
7-11