Subscribe to Our Youtube Channel
Related Manuals for turck BCT-M-IOL Series
Summary of Contents for turck BCT-M-IOL Series
- Page 1 Your Global Automation Partner BCT…-M…-IOL NCT…-M…-IOL Capacitive Sensors Instructions for Use...
- Page 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 3: Table Of Contents
Feedback about these instructions................ 5 Notes on the Product ........................ 6 Product identification.................... 6 Scope of delivery ...................... 6 Legal requirements...................... 6 Turck service........................ 6 For Your Safety.......................... 7 Intended use........................ 7 Obvious misuse...................... 7 General safety instructions.................. 7 Product Description ........................ 8 Device overview ...................... - Page 4 Contents 13 Decommissioning.......................... 20 14 Disposal ............................ 20 15 Technical Data.......................... 21 16 Turck subsidiaries – contact information.................. 22 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 5: About These Instructions
This symbol denotes actions that the user must carry out. RESULTS OF ACTION This symbol denotes relevant results of actions. Other documents Besides this document, the following material can be found on the Internet at www.turck.com: Data sheet Declarations of conformity (current versions) Commissioning manual IO-Link devices... -
Page 6: Notes On The Product
CAD files in numerous export formats. The contact details of Turck subsidiaries worldwide can be found on p. [} 22]. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 7: For Your Safety
The product is designed according to state-of-the-art technology. However, residual risks still exist. Observe the following warnings and safety notices to prevent damage to persons and property. Turck accepts no liability for damage caused by failure to observe these warning and safety notices. -
Page 8: Product Description
The sensors can also detect liquids or bulk material through a non-metallic container wall. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 9: Functions And Operating Modes
SIDI (Simple IO-Link Device Integration) enables IO-Link devices in PROFINET applications to be configured directly in the programming environment (e.g. TIA Portal). The Turck IO-Link devices are integrated in the GSDML file of the TBEN, TBPN and FEN20 series IO-Link masters and can be set in the programming environment as submodules of a modular I/O system. -
Page 10: Technical Accessories
2 m, sheathing material: M8 x 1 ø 9.5 PVC, black; cULus approval; 16.5 other cable lengths and types available, see www.turck.com 23.5 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... - Page 11 48.5 49.5 www.turck.com In addition to the above connection cables, Turck also offers other cable types for specific applications with the correct terminals for the device. More information on this is available from the Turck product database at www.turck.de/products in the Connectivity area.
-
Page 12: Installing
BCT2… NCT3… BCT4… NCT8… 16 mm 16 mm 18 mm 18 mm 12 mm 12 mm 18 mm 18 mm 16 mm 16 mm 24 mm 24 mm 8 mm 8 mm 9 mm 9 mm Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 13: Connection
Connection „ Connect the female connector of the connection cable to the male connector of the sensor. „ Connect the open end of the connection cable to an SELV or PELV power supply and/or processing units. Wiring diagrams 6.1.1 Wiring diagram for …CT…-M08…-V1131 4 BK 1 BN 3 BU... -
Page 14: Commissioning
Commissioning Commissioning The device is operational automatically once the cables are connected and the power supply is switched on. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 15: Operation
Operation The factory set switching distance is 2 mm (BCT2…), 3 mm (NCT3…), 4 mm (BCT4…) or 8 mm (NCT8…). The output function is factory set as NO (NO contact) and the output signal as PNP. LED indications LEDs Meaning Yellow Sensor actuated Yellow flashing (2 × 2 Hz) Teach-in operation successful. The sensor switches to normal operation. -
Page 16: Setting
Perform teach-in with object in front of the sensor. If both teach points are (teachpoint 2) present, the teach-in can be started via the Two Value Teach apply parameter. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... - Page 17 Parameter Meaning Two Value Teach apply The two-value teach-in from teach point 1 and teach point 2 is used. The arithmetic average value of the two teach points is set as a switching point. Dynamic Teach start The dynamic teach-in is started. All objects that pass the sensor are measured. The highest and lowest value of the object is determined.
-
Page 18: Setting Via Io-Link
The Current switchpoint value parameter is set in the sensor. The switching point is taught in successfully if the LEDs flash 2 × at a frequency of 2 Hz. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 19: Troubleshooting
Troubleshooting If the device does not function as expected, first check whether ambient interference is present. If there is no ambient interference present, check the connections of the device for faults. If there are no faults, there is a device malfunction. In this case, decommission the device and replace it with a new device of the same type. -
Page 20: Maintenance
If present: undo the connection between the device and the mounting aid. Disposal The devices must be disposed of correctly and must not be included in general household garbage. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 21: Technical Data
Technical Data BCT2-M08-IOL- NCT3-M08-IOL- BCT4-M12-IOL- NCT8-M12-IOL- V1131 V1131 H1141 H1141 Hysteresis 10…20 % Ambient temperature -25…+70 °C Temperature of medium -25…+70 °C Switching distance 2 mm 3 mm 4 mm 8 mm Electrical data Operating voltage 18…30 VDC (SELV or PELV) DC rated operational current ≤... -
Page 22: Turck Subsidiaries - Contact Information
Turck Banner Malaysia Sdn Bhd Unit A-23A-08, Tower A, Pinnacle Petaling Jaya, Jalan Utara C, 46200 Petaling Jaya Selangor www.turckbanner.my Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... - Page 23 Mexico Turck Comercial, S. de RL de CV Blvd. Campestre No. 100, Parque Industrial SERVER, C.P. 25350 Arteaga, Coahuila www.turck.com.mx Netherlands Turck B. V. Ruiterlaan 7, NL-8019 BN Zwolle www.turck.nl Austria Turck GmbH Graumanngasse 7/A5-1, A-1150 Wien www.turck.at Poland TURCK sp.z.o.o.
- Page 24 Over 30 subsidiaries and over 60 representations worldwide! 100032771 | 2022/03 100032771 www.turck.com...
Need help?
Do you have a question about the BCT-M-IOL Series and is the answer not in the manual?
Questions and answers