Advertisement
6 Remove mounting plate
Remove the mounting plate by turning it anti-clockwise.
8 Fit the large o-ring
Fit the large o-ring (item 5) to the perspex mounting plate.
10 Secure mounting plate
Align the devices and plate screw holes as shown.
Secure the device to the perspex mounting plate using the
washers and screws (items 1 and 3).
Specification
Compatibility
IP rating
Dimensions (Ø x D)
Weight
©2022 EMS Ltd. All rights reserved.
for use with FireCell wireless sounder
and visual indicator variants.
IP55
155 x 12 mm
0.25 Kg
7 Remove screws
Remove the three exposed screws. The battery retaining
plate must also be removed.
9 Fit the device to the mounting plate
Fit the device on to the perspex mounting plate (item 2) with
the o-ring between them as shown.
11 Fix to the wall
Fix the weather resistant sounder securely to the wall using
suitable 4 mm countersunk screws as shown.
The rubber plug should be located at the bottom of the device.
Regulatory information
Manufacturer
Carrier Manufacturing Polska Sp. Z o.o. Ul.
Kolejowa 24. 39-100 Ropczyce, Poland
Complies with
BS EN 60529:2000
Application
Type B: for outdoor use
Page 2 of 2
TSD076-99 Iss 9 21/01/2022 AJM
Advertisement
