Oliver SelectPro 747-N User's Operating And Instruction Manual
  1. Manuals
  2. Brands
  3. Oliver Manuals
  4. Commercial Food Equipment
  5. SelectPro 747-N
  6. User's operating and instruction manual

Oliver SelectPro 747-N User's Operating And Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Walker, Michigan, U.S.A. 49534-7564
USER'S OPERATING AND INSTRUCTION MANUAL
MODEL 747-N
OLIVER SelectPro™
Continuous-Feed Bread Slicer
and
OLIVER Select™
On-Demand Bread Slicer
0747S20000-CV

Advertisement

Table of Contents
loading

Related Manuals for Oliver SelectPro 747-N

Summary of Contents for Oliver SelectPro 747-N

  • Page 1 Walker, Michigan, U.S.A. 49534-7564 USER’S OPERATING AND INSTRUCTION MANUAL MODEL 747-N OLIVER SelectPro™ Continuous-Feed Bread Slicer OLIVER Select™ On-Demand Bread Slicer 0747S20000-CV...

  • Page 2: Table Of Contents

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER INDEX Section Description Document No. Page No. SAFETY INSTRUCTIONS -------------------------------------- 0747S20002 --------------------------- 1-1 DESCRIPTION/SPECIFICATIONS --------------------------- 0747S20003---------------------------- 2-1 Description -------------------------------------------------------------------------------------------------- 2-1 Specifications----------------------------------------------------------------------------------------------- 2-1 INSTALLATION INSTRUCTIONS ---------------------------- 0747S20004 --------------------------- 3-1...
  • Page 3 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER INDEX (Continued) REPLACEMENT PARTS SECTION (Continued) Section Description Document No. Page No. COVERS ------------------------------------------------------------ 0747S20010 --------------------------- 9-1 DRIVEN PULLEY AND ROCKER ASSEMBLY------------ 0747S20011 -------------------------- 10-1...

  • Page 4: Safety Instructions

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER SAFETY INSTRUCTIONS WARNING VARIOUS SAFETY DEVICES AND METHODS OF GUARDING HAVE BEEN PROVIDED ON THIS MACHINE. IT IS ESSENTIAL HOWEVER THAT THE MACHINE OPERATORS AND MAINTENANCE PERSONNEL OBSERVE THE FOLLOWING SAFETY PRECAUTIONS.

  • Page 5: Description/Specifications

    DESCRIPTION/SPECIFICATIONS Description The Oliver Model 747-N Bread Slicer is a compact, sturdy design, incorporating many time-tested components that have been used in bakeries worldwide for many years. The easy to operate Select version has a patent pending infeed system that can be loaded and unloaded from the front of the machine.

  • Page 6: Specifications

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER Specifications Space Requirements: Model 747-N (All Dimensions are Approximate) Select SelectPro 0747S20003...
  • Page 7 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER Product Capacities: Length 16 Inches (See Note) Width 10.5 inches (See Note) Height 2.25 - 6 inches (See Note) NOTE LENGTH, WIDTH AND HEIGHT DIMENSIONS ARE MAXIMUM CAPACITY.

  • Page 8: Installation Instructions

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER INSTALLATION INSTRUCTIONS Slicer Installation: Before starting the Installation process make sure you observe the following caution notes. CAUTION THE SLICER IS HEAVY, USE PROPER TECHNIQUE WHEN LIFTING.

  • Page 9: Operating Instructions

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER OPERATING INSTRUCTIONS WARNING ALWAYS USE CARE WHENEVER WORKING NEAR THE CUTTING BLADES. WARNING NEVER START MACHINE BEFORE LOADING THE PRODUCT. Select • Adjust the outfeed fence (bread stop) location and width, if necessary.
  • Page 10 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER OPERATING INSTRUCTIONS (Continued) SelectPro • Adjust the outfeed fence (bread stop) location and width, if necessary. • Open chute cover (Fig. 1, next page) •...
  • Page 11 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER NOTE THE GRAVITY FEED SLICER’S OPTIMUM OPERATING EFFICIENCY WILL BE MAINTAINED BY ENSURING THAT THE INFEED CHUTE IS KEPT FULLY LOADED. THE ACTUAL SPEED OF SLICING IS DEPENDENT ON THE NUMBER OF PRODUCTS IN POSITION ON THE INFEED CHUTE, SHARPNESS OF CUTTING BLADES AND TEXTURE OF THE PRODUCT.
  • Page 12 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER CAUTION THE BLADES ARE EXTREMELY SHARP. DO NOT TOUCH MOVING OR STATIONARY BLADES. See “Maintenance” section for steps to change components from one slice thickness to another.

  • Page 13: Troubleshooting

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER TROUBLE SHOOTING WARNING ALWAYS DISCONNECT THE SLICER FROM THE POWER SUPPLY BEFORE ATTEMPTING ANY TYPE OF MAINTENANCE TASK, INCLUDING TROUBLESHOOTING. The Slicer Will Not Start (Motor Is Not Humming) •...

  • Page 14: The Slicer Will Not Start (Motor Is Humming)

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER The Slicer Will Not Start (Motor Is Humming or the internal circuit breaker trips repeatedly) CAUTION DO NOT ALLOW THE MOTOR TO HUM WITHOUT STARTING.

  • Page 15: Bread Slices Vary In Thickness

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER Bread Slices Vary in Thickness • The blade frames are out of adjustment. (See the “Maintenance” section of this manual under “Adjusting the Blade Frames When Slices Vary in Thickness” on how to correct this problem.)

  • Page 16: The Hand Lever Pulls Hard

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER The Hand Lever Pulls Hard (Select only) • Check the pusher guide tracks for a build-up of foreign material. • Check pusher lever mechanism, cam rollers, and cam plates to determine if any parts are worn, rubbing or loose.

  • Page 17: Maintenance

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER MAINTENANCE Removing the Blade Frames WARNING ALWAYS UNPLUG THE SLICER BEFORE PERFORMING ANY TYPE OF MAINTENANCE TASK. • Remove the lower and upper outfeed tables and bagging scoop (4 knobs). Pull each table downward to remove.
  • Page 18 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER WARNING BLADES ARE EXTREMELY SHARP. ALWAYS HANDLE BLADE FRAMES WITH CARE. 4 BLADE FRAME ATTACHMENT BOLTS PER FRAME ASSEMBLY MOVE BELT TO REPOSITION BLADE...

  • Page 19: Installing The Blade Frames

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER WARNING ALWAYS DISCONNECT THE SLICER FROM THE POWER SUPPLY BEFORE ATTEMPTING ANY TYPE OF MAINTENANCE TASK. Installing the Blade Frames Installation of the blade frames is done by reversing the removal procedures.
  • Page 20 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER Changing Slice Thickness WARNING ALWAYS DISCONNECT THE SLICER FROM THE POWER SUPPLY BEFORE ATTEMPTING ANY TYPE OF MAINTENANCE TASK. WARNING BLADES ARE EXTREMELY SHARP. ALWAYS HANDLE BLADE FRAMES WITH CARE.

  • Page 21: Changing The Blades

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER WARNING ALWAYS DISCONNECT THE SLICER FROM THE POWER SUPPLY BEFORE ATTEMPTING ANY TYPE OF MAINTENANCE TASK. WARNING BLADES ARE EXTREMELY SHARP. ALWAYS HANDLE WITH CARE.
  • Page 22 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER WARNING BLADES ARE EXTREMELY SHARP. ALWAYS HANDLE WITH CARE. 3. Seat an empty blade cartridge on top of blades (as pictured). The plastic cartridge has “TOP”...
  • Page 23 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER WARNING BLADES ARE EXTREMELY SHARP. ALWAYS HANDLE WITH CARE. 5. Seat the blade frame upright as shown and tap on the two “ears” of the blade frame with a rubber mallet to lower the top section of the frame.
  • Page 24 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER WARNING BLADES ARE EXTREMELY SHARP. ALWAYS HANDLE WITH CARE. 6. Return the blade frame to its initial position in step 1 and carefully lift the BOTTOM of the cartridge first to remove the blade rivets from the bottom holders on the frame.
  • Page 25 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER WARNING BLADES ARE EXTREMELY SHARP. ALWAYS HANDLE WITH CARE. INSTALLING BLADES Note: To prevent mix-ups, remove and replace blades one blade frame at a time, matching the blade orientation of the new blades to the old blades.
  • Page 26 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER WARNING BLADES ARE EXTREMELY SHARP. ALWAYS HANDLE WITH CARE. 3. Begin to tighten the bolts on the top of the frame. Finger tightening at first, tighten each bolt a few turns at a time while keeping a careful eye that the TOP blade rivets remain in the TOP holders throughout the duration of the tightening.
  • Page 27 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER WARNING ALWAYS DISCONNECT THE SLICER FROM THE POWER SUPPLY BEFORE ATTEMPTING ANY TYPE OF MAINTENANCE TASK. CAUTION OVER-TIGHTENING THE DRIVE BELT MAY CAUSE BEARING OR MOTOR FAILURE.

  • Page 28: Replacing The Gas Spring

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER WARNING ALWAYS DISCONNECT THE SLICER FROM THE POWER SUPPLY BEFORE ATTEMPTING ANY TYPE OF MAINTENANCE TASK. Replacing and Tightening the Drive Belt (continued)

  • Page 29: Adjusting The Blade Frames When Slices Vary In Thickness

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER WARNING ALWAYS DISCONNECT THE SLICER FROM THE POWER SUPPLY BEFORE ATTEMPTING ANY TYPE OF MAINTENANCE TASK. Adjusting the Blade Frames When Slices Vary in Thickness...

  • Page 30: Adjusting The Clearance Between The Blade Frames

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER WARNING ALWAYS DISCONNECT THE SLICER FROM THE POWER SUPPLY BEFORE ATTEMPTING ANY TYPE OF MAINTENANCE TASK. Adjusting the Clearance Between the Blade Frames Remove the four screws attaching the push button panel and place the panel on top of the slicer.

  • Page 31: Cleaning

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER WARNING ALWAYS DISCONNECT THE SLICER FROM THE POWER SUPPLY BEFORE ATTEMPTING ANY TYPE OF MAINTENANCE TASK. Adjusting the Clearance Between the Blade Frames (continued) When the eccentric pins are in the desired position tighten each of the locknuts to secure the position of the eccentrics.

  • Page 32: Recommended Spare Parts

    Stud-Driven Pulley 0797-0071-4 Connecting Rod Assembly with Bearings 0747-0007 Stud-Swing 5220-4040 Bearing-Rocker Shaft 5220-0042 Bearing-Swing Shaft 6084-8714 Gas Spring (SelectPro Slicer Only) *For Other Electrics Contact the Factory For Service Parts Call Oliver Packaging & Equipment Company @ 800-253-3893 0747S20008...

  • Page 33: Main Frame

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER MAINFRAME AND STAND 0747S20009...

  • Page 34: Stand Detail

    Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER STAND DETAIL 0747S20009...
  • Page 35 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER Covers and Crumb Deflectors 0747S20010...
  • Page 36 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER DRIVEN PULLEY AND ROCKER ASSEMBLY ROCKER ASSEMBLY DETAILS 0747S20011 10-1...
  • Page 37 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER UPPER BLADE FRAME SUPPORT ASSEMBLY 0747S20011 10-2...
  • Page 38 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER INFEED ASSEMBLY- SELECT (ON-DEMAND VERSION) 0747S20012 11-1...
  • Page 39 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER INFEED ASSEMBLY- SELECT (ON-DEMAND VERSION) CONTINUED 0747S20012 11-2...
  • Page 40 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER INFEED ASSEMBLY- SELECT (ON-DEMAND VERSION) CONTINUED ASSEMBLY- LEVER 0747S20012 11-3...
  • Page 41 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER INFEED ASSEMBLY- SELECT (ON-DEMAND VERSION) CONTINUED ASSEMBLY- PUSHER BAR Note: see “slice parts” lists for pusher part number applicable to slice spacing 0747S20012...
  • Page 42 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER INFEED - SELECTPRO (CONTINUOUS FEED VERSION) ASSEMBLY DRAWING 0747S20013 12-1...
  • Page 43 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER INFEED - SELECTPRO (CONTINUOUS FEED VERSION) CONT’D PARTS LIST 0747S20013 12-2...
  • Page 44 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER INFEED ASSEMBLY- SELECTPRO (CONTINUOUS FEED VERSION) CONT’D TABLE ASSEMBLY 0747S20013 12-3...
  • Page 45 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER INFEED ASSEMBLY- SELECTPRO (CONTINUOUS FEED VERSION) CONT’D TABLE ASSEMBLY PARTS LIST 0747S20013 12-4...
  • Page 46 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER INFEED - SELECTPRO (CONTINUOUS FEED VERSION) CONT’D PUSHER SLIDE MECHANISM SUBASSEMBLY 0747S20013 12-5...
  • Page 47 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER HOLD DOWN MOUNT ASSEMBLY 0747S20014 13-1...
  • Page 48 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER OUTFEED PARTS- COMMON (BOTH SELECT AND SELECTPRO) 0747S20018 14-1...
  • Page 49 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER OUTFEED PARTS LIST- COMMON (BOTH SELECT AND SELECTPRO) 0747S20018 14-2...
  • Page 50 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER SLICE PARTS (1/2” SHOWN, SELECT) NOTE: FOR 3/8 SLICE SPACING REPLACE -032 IN PART NUMBER WITH -024 CONTACT OLIVER SERVICE FOR 3/8 SPACED BLADE FRAMES OR ARTISAN BLADE EQUIPPED BLADE FRAMES. 0747S20015 15-1...
  • Page 51 (800) 253-3893 747-N BREAD SLICER SLICE PARTS (1/2” SHOWN, SELECT PRO) … NOTE: FOR 3/8 SLICE SPACING REPLACE -032 IN PART NUMBER WITH -024 CONTACT OLIVER SERVICE FOR 3/8 SPACED BLADE FRAMES OR ARTISAN BLADE EQUIPPED BLADE FRAMES 0747S20015 15-2...
  • Page 52 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER 0747S20015 15-3...
  • Page 53 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER ELECTRICAL PARTS- COMMON (BOTH SELECT AND SELECTPRO) 0747S20016 16-1...
  • Page 54 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER ELECTRICAL PARTS LIST- COMMON (BOTH SELECT AND SELECTPRO) 0747S20016 16-2...
  • Page 55 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER ELECTRICAL PANEL- COMMON (BOTH SELECT AND SELECTPRO) 0747S20016 16-3...
  • Page 56 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER ELECTRICAL PANEL LIST- COMMON (BOTH SELECT AND SELECTPRO) 0747S20016 16-4...
  • Page 57 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER ELECTRICAL PARTS- USED ON SELECT ONLY ELECTRICAL PARTS- USED ON SELECTPRO ONLY 0747S20016 16-5...
  • Page 58 Oliver Packaging & Equipment Company 3236 Wilson Drive NW, Walker, MI 49534 (800) 253-3893 747-N BREAD SLICER 0747S20017 17-1...
  • Page 59 SHALL APPLY. PARTS Oliver Packaging & Equipment Company warrants that if any part of the equipment (other than a part not manufactured by Oliver) proves to be defective (as defined below) within five years after shipment, and if Buyer returns the defective part to Oliver Packaging & Equipment in accordance with the accompanying Warranty Procedure and Returned Parts Policy, Freight Prepaid to Oliver Packaging &...
  • Page 60 4. The service dealer will then complete an invoice and send it to the Parts and Service Department at Oliver Packaging & Equipment Company. 5. The Parts and Service Manager of Oliver Packaging and Equipment Company will review the invoice and returned parts, if applicable, and approve for payment.
  • Page 61 This policy applies to all parts returned to the factory whether for warranted credit, replacement, repair or re-stocking. Oliver Packaging and Equipment Company requires that the customer obtain a Return Material Authorization (RMA) number before returning any part. This number should appear on the shipping label and inside the shipping carton as well.

This manual is also suitable for:

Select 747-n

Table of Contents