Related Manuals for Oliver 641
Summary of Contents for Oliver 641
- Page 1 Walker, Michigan, U.S.A. 49534-7564 USER’S OPERATING AND INSTRUCTION MANUAL MODEL 641 DOUGH ROLLER 0641S20000-CV...
-
Page 2: Table Of Contents
641 DOUGH ROLLER INDEX Section Description Document No. Page No. SAFETY INSTRUCTIONS -------------------------------------- 0641S20003 --------------------------- 1-1 DESCRIPTION/SPECIFICATIONS --------------------------- 0641S20004---------------------------- 2-1 Description -------------------------------------------------------------------------------------------------- 2-1 Specifications----------------------------------------------------------------------------------------------- 2-1 INSTALLATION INSTRUCTIONS ---------------------------- 0641S20005 --------------------------- 3-1 Dough Roller Installation --------------------------------------------------------------------------------- 3-1 OPERATING INSTRUCTIONS -------------------------------- 0641S20006 --------------------------- 4-1... - Page 3 INDEX (Continued) Section Description Document No. Page No. DRIVE --------------------------------------------------------------- 0641S20014 ---------------------------12-1 Drawing ------------------------------------------------------------------------------------------------ 12-1 Parts List -----------------------------------------------------------------------------------------------12-2 ELECTRICAL PARTS ------------------------------------------- 0641S20015 ---------------------------13-1 Drawing ------------------------------------------------------------------------------------------------ 13-1 Parts List -----------------------------------------------------------------------------------------------13-2 OPTIONAL STAND ---------------------------------------------- 0641S20016 ---------------------------14-1 Drawing ------------------------------------------------------------------------------------------------ 14-1 Parts List -----------------------------------------------------------------------------------------------14-2 WIRING DIAGRAMS -------------------------------------------- 0641S20017 ---------------------------15-1 WARRANTY ------------------------------------------------------- GEN 040225 WARRANTY PROCEDURE------------------------------------ GEN 040226...
-
Page 4: Safety Instructions
641 DOUGH ROLLER SAFETY INSTRUCTIONS WARNING VARIOUS SAFETY DEVICES AND METHODS OF GUARDING HAVE BEEN PROVIDED ON THIS MACHINE. IT IS ESSENTIAL HOWEVER THAT THE MACHINE OPERATORS AND MAINTENANCE PERSONNEL OBSERVE THE FOLLOWING SAFETY PRECAUTIONS. IMPROPER INSTALLATION, MAINTENANCE, OR OPERATION OF THIS EQUIPMENT COULD CAUSE SERIOUS INJURY OR DEATH. -
Page 5: Description/Specifications
641 DOUGH ROLLER DESCRIPTION/SPECIFICATIONS Description The Oliver Model 641 Dough Roller is engineered to exacting standards. It’s designed to provide maximum performance in minimal space. The machine is easy to operate, crusts of uniform thickness are made quickly and easily. - Page 6 DESCRIPTION/SPECIFICATIONS (Continued) NOTE Standard Electrical Options: (Others consult factory). ½ HP, 1 phase, 60 hz, 115VAC, 7 Amps. ½ HP, 1 phase, 60 hz, 230VAC, 3.5 Amps. ½ HP, 1 phase, 50 hz, 220VAC, 3.5 Amps. Standard Product Width Capacity 14”, 17”, &...
-
Page 7: Installation Instructions
641 DOUGH ROLLER INSTALLATION INSTRUCTIONS Dough Roller Installation: Before starting the Installation process make sure you observe the following three caution notes. CAUTION THE DOUGH ROLLER IS HEAVY, USE PROPER TECHNIQUE WHEN LIFTING. KEEP BACK STRAIGHT, KNEES BENT, AND LIFT WITH LEGS. - Page 8 INSTALLATION INSTRUCTIONS (Continued) Optional Stand Mounted Note: One bottom guard bolt will have to be removed to mount machine to stand. Select a location for your dough roller which has a level surface, and which has electrical service compatible with the load the machine will place on it as indicated on the electrical data plate of the machine.
-
Page 9: Operating Instructions
641 DOUGH ROLLER OPERATING INSTRUCTIONS WARNING ALWAYS USE CARE WHENEVER WORKING NEAR THE ROLLERS. KEEP HANDS CLEAR OF DOUGH CHUTE. Machine Preparation 1. Make sure the dough chute and trays are dry. 2. Dust the transfer tray (Item 200, page 10-1) with flour, Leave a little extra flour in the tray to dust the bottom side of the dough before it is sent through the second set of rollers. -
Page 10: Troubleshooting
641 DOUGH ROLLER TROUBLESHOOTING WARNING ALWAYS DISCONNECT THE DOUGH ROLLER FROM THE POWER SUPPLY BEFORE ATTEMPTING ANY TYPE OF MAINTENANCE TASK, INCLUDING TROUBLESHOOTING. The Dough Roller Will Not Start (Motor Is Not Humming) · The machine is not plugged in. -
Page 11: Lines Or Marks In Finished Crust
TROUBLESHOOTING (Continued) · Broken belt or chain. (Have a qualified service agent evaluate the machine for adjustment or replacement of defective parts.) · The motor has failed. (Have it checked by a qualified electrician.) Lines or Marks in Finished Crust ·... -
Page 12: Maintenance
641 DOUGH ROLLER MAINTENANCE WARNING ALWAYS UNPLUG THE DOUGH ROLLER BEFORE PERFORMING ANY TYPE OF MAINTENANCE TASK. Cleaning The machine should be cleaned daily, more often during heavy use. Use a damp, soft cloth on the fixed parts of the machine. Trays and scrapers may be taken to sink for cleaning. -
Page 13: General Notes On Disassembly
Service If you properly care for your Oliver Products Company Dough Roller, it will give you long, trouble free service. If replacement parts are required, order them from the factory. Refer to the Replacement Parts section of this manual for the item’s specific part number. -
Page 14: Recommended Spare Parts
Heater-Overload (115 VAC) 5708-2423 Heater-Overload (220/230 VAC) 4560-2508-1109 Knob with stud (1/4-20) 5911-7033 Knob (3/8-16) 5911-7046 Knob (1/2-13) 0641-1017-1 Main Drive Sprocket 0641-0188 Chain assembly *For Other Electrics Contact the Factory For Service Parts Call Oliver Products @ 800-253-3893 0641S20009... -
Page 15: Main Frame
MAIN FRAME 0641S20010... -
Page 16: Parts List
Tie Bar (round) (17” machine) 0641-1012-002 Tie Bar (round) (21” machine) 0641-1012-003 Motor Mounting Plate (14” machine) 0641-1203-001 Motor Mounting Plate (17” & 21” machines) 0641-1203-002 Dial-Top 0641-1100 Pin-Spring 5835-6789 Dial-Bottom 0641-1101 FOR SERVICE PARTS CALL OLIVER PRODUCTS @ 800-253-3893 0641S20010... -
Page 17: Rollers
ROLLERS 0641S20011... -
Page 18: Parts List
Knob (1/2-13) 5911-7046 Roller (14” machine) 0641-1240-102 Roller (17” machine) 0641-1240-103 Roller (21” machine) 0641-1240-104 Shaft-Center Roller (14” machine) 0641-1013-001 Shaft-Center Roller (17” machine) 0641-1013-002 Shaft-Center Roller (21” machine) 0641-1013-003 Continued FOR SERVICE PARTS CALL OLIVER PRODUCTS @ 800-253-3893 0641S20011... - Page 19 ROLLERS PARTS LIST (Continued) ITEM NO PART DESCRIPTION PART NUMBER Spacer-Adjustment Side 0641-1074 Spacer-Drive Side 0641-1075 Shaft-Finish Roller (14” machine) 0641-1014-001 Shaft-Finish Roller (17” machine) 0641-1014-002 Shaft-Finish Roller (21” machine) 0641-1014-003 Handle-Adjustment Lower 0641-0012 FOR SERVICE PARTS CALL OLIVER PRODUCTS @ 800-253-3893 0641S20011...
-
Page 20: Tables
TABLES 0641S20012 10-1... -
Page 21: Parts List
Scraper Body RH (14” machine) 0641-1141-001 Scraper Body RH (17” machine) 0641-1141-002 Scraper Body RH (21” machine) 0641-1141-003 Post-Scraper 0641-1312 Spring-RH 4605-1000-0016 Lifter-Spring RH 0641-1053-0001 Washer-U 5851-8137 Continued FOR SERVICE PARTS CALL OLIVER PRODUCTS @ 800-253-3893 Rev. 8/27/05 0641S20012 10-2... - Page 22 0641-1201-001 Scraper Assembly RH 0641-1144-0001 Support Scraper Slide 0641-1058 Retainer-Spring 0641-1034 Retainer-Spring Upper 0641-1034-001 Spring 15/16 x 2-1/16 4605-1000-0017 Support Scraper Slide 0641-1056 Link-Strap 0641-1059 Support Tray and Slide 0641-1055 FOR SERVICE PARTS CALL OLIVER PRODUCTS @ 800-253-3893 0641S20012 10-3...
- Page 23 THIS PAGE WAS INTENTIONALLY LEFT BLANK. GEN020319...
-
Page 24: Covers
COVERS REV. 11/10/05 0641S20013 11-1... -
Page 25: Parts List
Knob with Stud (1/4-20) 4560-2508-1109 Knob (3/8-16) 5911-7033 Outfeed Guard 0641-0028-0001 Bottom Guard (14” machine) 0641-0027-001 Bottom Guard (17” machine) 0641-0027 Bottom Guard (21” machine) 0641-0027-002 Chain Guard 0641-0026-0001 REV. 11/10/05 FOR SERVICE PARTS CALL OLIVER PRODUCTS @ 800-253-3893 0641S20013 11-2... -
Page 26: Drive
DRIVE 0641S20014 12-1... -
Page 27: Parts List
Shim-Bracket 0641-1353 Bearing 5250-0207 0641-25088K Main Drive Sprocket Spacer-Main Drive Sprocket 0641-1079 Sheave 5L 5615-1629 0641-1028-0001 Arm-Chain Takeup RH Retaining Ring 5840-1357 Idler Roller 0641-1029 Stud-Shaft Idler 0641-1031 Rev. 2/13/19 FOR SERVICE PARTS CALL OLIVER PRODUCTS @ 800-253-3893 0641S20014 12-2... -
Page 28: Electrical Parts
ELECTRICAL PARTS Rev. 8/27/05 0641S20015 13-1... -
Page 29: Parts List
Belt-V (5L580) (Not shown) 5601-1238 Strain relief 90 deg. 5770-4806 Starter-Manual 5709-1137 808* Heater-Overload (115 VAC) 5708-2434 808* Heater-Overload (230 VAC) 5708-2427 Strain Relief 5765-1082 *For Other Electrics Contact the Factory FOR SERVICE PARTS CALL OLIVER PRODUCTS @ 800-253-3893 Rev. 3/23/07 0641S20015 13-2... -
Page 30: Optional Stand
OPTIONAL STAND 0641S20016 14-1... -
Page 31: Parts List
ITEM NO PART DESCRIPTION PART NUMBER Stand (14” machine) 0641-1044-101 Stand (17” machine) 0641-1044-102 Stand (21” machine) 0641-1044-103 Bolt 3/8 x 2-1/2 5843-1060 Nut 3/8 5832-0522 Socket-Caster 5902-2601 Caster 2-1/2” 5902-2348 FOR SERVICE PARTS CALL OLIVER PRODUCTS @ 800-253-3893 0641S20016 14-2... - Page 32 WIRING DIAGRAM 1-60-115 WIRING DIAGRAM 1-60-230 *For Other Electrics Contact the Factory FOR SERVICE PARTS CALL OLIVER PRODUCTS @ 800-253-3893 0641S20017 15-1...
- Page 33 WARRANTY PARTS Oliver Packaging & Equipment Company warrants that if any part of the equipment (other than a part not manufactured by Oliver Packaging & Equipment ) proves to be defective (as defined below) within one year after shipment, and if Buyer returns the defective part to Oliver Packaging & Equipment within one year, Freight Prepaid to Oliver Packaging &...
- Page 34 4. The service dealer will then complete an invoice and send it to the Parts and Service Department at Oliver Packaging & Equipment Company. 5. The Parts and Service Manager of Oliver Packaging and Equipment Company will review the invoice and returned parts, if applicable, and approve for payment.
- Page 35 This policy applies to all parts returned to the factory whether for warranted credit, replacement, repair or re-stocking. Oliver Packaging and Equipment Company requires that the customer obtain a Return Material Authorization (RMA) number before returning any part. This number should appear on the shipping label and inside the shipping carton as well.