Connecting A Power Cord - eMachines etower Series User Manual

Connecting a Power Cord

Before you plug the power cord into the wall socket, you should set the voltage selection switch
to correct position. The voltage selection switch must be set to reflect the correct voltage the
system operates on.
If you set the voltage selection switch to correct position, plug the power cord into the AC power
receptacle on the back panel. Then plug the other end of the power cord into an appropriate
grounded electrical outlet.
WARNING
To avoid generating an electric shock, be sure to plug the cord into the system before plugging it
into the wall socket.
CAUTION
For protection of your computer and other devices during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug the computer and other devices from the
wall outlet and disconnect the antenna or cable system. This will prevent damage to the computer
and other devices due to lighting and power line surges.
......................................................................................................................................................................................................................................
2-8
Setting Up Your System
.........................................................................................................................................
AC power
receptacle