Exiting The Setup Program - eMachines etower Series User Manual

Exiting the Setup Program

To exit the Setup program, press Alt and Spacebar keys simultaneously. If you press these keys,
you can see the following window.
To save the settings and exit, select Save changes and Exit. The system reboots with your new
settings.
If you want to exit the Setup program without saving your settings, select Do not save changes
and Exit. The system reboots with your original settings.
To return to the Setup menu to make corrections, select Continue.
If you saved your changes or quitted without saving the settings, the Setup program resets the
system and the computer performs its power on diagnostic tests.
If your computer detects a problem in your Setup configuration, you may see an error message
and a prompt to run the Setup program when it is rebooting. Follow the instructions on the screen
to run the Setup program and correct the problem.
......................................................................................................................................................................................................................................
4-4
Using the BIOS Setup Program
.........................................................................................................................................