eMachines etower Series User Manual page 79

8. Slide the device into the bay and secure it to the computer case with screws.
9. Connect the power and interface cables to the device installed.
10. To reassemble the front panel to the system, press the front panel toward the system until the
tabs on the front panel click into place.
11. Hook the front panel connector cable and replace the HDD bracket to the chassis.
12. Replace the system cover according to the instructions in "Replacing the Cover" in Chapter 5.
......................................................................................................................................................................................................................................
6-12
Installing and Removing Board Options and Drives
.........................................................................................................................................
Secondary EIDE
connector