Connecting To A Broadband Modem Or Network; Connecting A Dial-Up Modem - eMachines EL1360 User Manual

Connecting to a broadband
modem or network

Connecting a dial-up modem

8
Chapter 2: Setting Up and Getting Started
Important
Your computer may be equipped with a built-in Ethernet
(network) jack. For information about setting up a wired or
Ethernet network.
You can connect your computer to a cable or DSL
broadband
(
network.
To connect to a broadband modem or to an
Ethernet network:
1 Insert one end of the network cable into the
network jack
computer. For the location, see
page 3.
2 Insert the other end of the network cable
into a cable modem, DSL modem, or network
jack.
Warning
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
Your computer may have a 56K modem that you
can use with a standard telephone line to connect
to the internet or fax documents.
To connect the modem:
1 Insert one end of the modem cable into the
modem jack
your computer. For the location, see
on page
2 Insert the other end of the modem cable into
a telephone wall jack. (The modem will not
work with digital or PBX telephone lines.)
) modem or to a wired Ethernet
on the back of your
on the modem at the back of
3.
wireless
"Back" on
"Back"