Sim-Lab DASH SD43 LED Instruction Manual page 8

Press 'USBD480' (2).
4
3
In the 'Screen #1' section, check 'Enable display' (3). The 'Connected' indicator will
appear on its right hand side. When the screen is connected, go back to
'Dashboards' (4).
2
Hover over the dashboard you want to display and select 'Start'.
5
A popup will appear, select 'On USBD480 screen' (6).
The display will now boot using the selected dash.
6
NOTE: Importing or changing dash profiles is not part of this document. For more
information on that topic, please see the SimHub documentation.
8
8 11 |