Advertisement
Quick Links
Advertisement
Related Manuals for Sim-Lab EVO
Summary of Contents for Sim-Lab EVO
- Page 1 INSTRUCTION MANUAL FRONT MOUNT EVO VERSION 1.5 Last updated: 24-02-2022...
-
Page 2: Before You Start
BEFORE YOU START: Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions on assembly. This requires only a set of simple tools and some of your time. Please check the bill of materials before starting (page 10) and make sure all the parts are delivered. - Page 3 The corner brackets are from the Front Mount hardware kit since they need to retain their aligning tabs. Brackets from your existing GT1-EVO build with their tabs broken off, can be re-used as well. We’ll show this on Page 6.
- Page 4 Slot-Nut M8 Slot-Nut M8 (re-used) 4 11...
- Page 5 Corner Bracket M8 X 16 (re-used) (re-used) 5 11...
- Page 6 Front Mount Corner Lock-Nut M8 M8 X 30 In case you are converting your original Bracket** (A9) GT1-EVO to a Front Mount, you can re-use the original brackets which held the wheel deck in place. 6 11...
- Page 7 Lock-Nut M8 Front Mount Front Mount Corner Bracket M8 X 25 Side Plate LEFT Side Plate Right (A10)
- Page 8 LEFT: GT1-EVO PURCHASED PRE-2020, OFFSET 10MM. 10MM RIGHT: 0,4” CURRENT GT1-EVO, SIDES FLUSH WITH FRONT MOUNT. 480MM 18,9” 8 11...
- Page 9 M8 X 20 Washer M8 9 11...
-
Page 10: Hardware Kit
HARDWARE KIT Part QTY Note Front mount Front mount side plate LEFT Front mount side plate RIGHT Corner bracket 40x40 Corner bracket 40x40 cap Bolt M8 X 40 DIN 912 Bolt M8 X 20 DIN 912 Bolt M6 X 20 DIN 912 Bolt M8 X 30 DIN 7991 Countersunk Bolt M8 X 25 DIN 7991... - Page 11 They can be reached at support@sim-lab.eu Alternatively, we now have a Discord server where there are quite some experienced Sim-Lab customers hanging out. They might just help you along if you ask them nicely ;) www.sim-lab.eu/discord...
Need help?
Do you have a question about the EVO and is the answer not in the manual?
Questions and answers