Connecting The External Ir Receiver; (For Vr-9080) - Kenwood VR-9080 Instruction Manual

Setting up the system
Connecting the external IR receiver (For VR-9080)
The remote control for this receiver has the IR (infrared rays) transmission function. IR repeaters enables you to control components located in cabinets
or behind glass doors. You can enjoy a wider remote control signal range by placing the IR receiver away from the receiver.
Monitor TV
Connecting IR repeater
1 Connect the IR repeater to the device as described in the
repeater's manual.
2 Connect the IR repeater cable(s) to the IR REPEATER OUT
jack(s).
Notes
• IR repeaters send a signal similar to the device's own remote con-
trol. Xantech repeaters (example : models 284M or 286M) are com-
patible with your new audio-video receiver.
18 EN
IR repeaters
IR
RECEIVER
IN
IR
REPEATER
OUT
IR receiver
(Commercially
available)
Shape of plug to be connected.
IR RECEIVER IN
Stereo mini plug
Sleeve
Tip
Ring
IR IN / OUT SPECIFICATION:
Terminal IR RECEIVER
IN
To Tip Signal
To Ring Ground
To Sleeve + 8V
IR REPEATER OUT
Mono mini plug
Sleeve
Tip
IR REPEATER
OUT
Signal
Ground