Other Settings - Kenwood VR-9080 Instruction Manual

Preparing for surround sound
3 Measure the distance from the listening position to each of
the speakers.
Jot down the distance to each of the speakers.
Distance to Front Left Speaker (L)
Distance to Center Speaker (C)
Distance to Front Right Speaker (R)
Distance to Surround Right (SR)
Distance to Surround Back Right (SBR) : ____ feet (meters)
Distance to Surround Back (SB)
Distance to Surround Back Left (SBL) : ____ feet (meters)
Distance to Surround Left (SL)
Distance to Subwoofer (SW)
• If you have selected "SB NML/THXx1" or "SB LARGEx1",
"SBR" and "SBL" are not appeared but "SB" is appeared on the
Display.
4 Use the 5/∞ keys or MULTI @/# keys to select the speakers
and the MULTI CONTROL knob or MULTI %/fi keys to adjust
the distance to the Front Speakers.
The speaker indicator to be adjusted blinks.
SP MUTE
A B CLIP
L C SW R
LFE
SL S SB SR
• The allowable setting range is 0.1 to 30.0 feet (0.03 to 9.14 m),
adjustable in 0.1 foot (about 0.03 m) increments.
5 Repeat steps 4 to input the distance for each of the speakers.
6 Press the MEMORY/ENTER key or the ENTER key to return to
the "SP DISTANCE" display.
• The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
4
Exit the MANUAL SETUP mode.
1 Press the 5/∞ keys or MULTI @/# keys to select the "RE-
TURN"
SP MUTE
A B CLIP
L R
SL S SB SR
2 Press the MEMORY/ENTER key or the ENTER key to return to
the "MANUAL SETUP" display.
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
: ____ feet (meters)
STEREO
Indication in feet
STEREO

Other settings

1
Adjust the Subwoofer RE-MIX.
1 Press the 5/∞ keys or MULTI @/# keys to select the "SW RE-
MIX" and press the MEMORY/ENTER key or the ENTER key.
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the appropriate Subwoofer re-mix setting.
If "SW RE-MIX ON" is selected as the subwoofer re-mix setting,
the low frequencies are enhanced by adding the low frequencies
of other channels to the subwoofer channel depending on the
speaker setup.
1 SW RE-MIX ON : Subwoofer re-mix setting mode to the
2 SW RE-MIX OFF : Subwoofer re-mix setting mode to the
• If Subwoofer is turned off or "FRNT NML/THX" is selected at the
Front Speaker setting, Subwoofer re-mix setting is not visible.
• By selecting "SW RE-MIX OFF", the low frequencies will play
through the Front Speakers only.
This selection is preferred by THX.
3 Press the MEMORY/ENTER key or the ENTER key to accept
the setting.
2
Select the CROSSOVER frequency.
CROSSOVER function is to adjust the receiver's audio output charac-
teristics with the speakers' characteristics which differs depending
on the size of the speakers. You will be able to enjoy a more natural
and dynamic sound experience even with small size speakers.
1 Press the 5/∞ keys or MULTI @/# keys to select the "CROSS
OVER" and press the MEMORY/ENTER key or the ENTER key.
• CROSSOVER function will not be available when "LARGE" is
selected for all the speakers in step 1 and "SW RE-MIX OFF"
is selected .
2 Use the MULTI CONTROL knob or MULTI %/fi keys to select
the CROSSOVER frequency.
1 FREQ. : 40Hz
2 FREQ. : 60Hz
3 FREQ. : 80Hz-THX
4 FREQ. : 100Hz
5 FREQ. : 120Hz
6 FREQ. : 150Hz
• If you have THX certified speakers, select "FREQ.:80Hz-THX".
SP MUTE
A B CLIP
L R
3 Press the MEMORY/ENTER key or the ENTER key to accept
the setting.
3
Adjust the distance between left and right Surround Back
speaker.
This mode is avaiable only when "SB NML/THXx2" or "SB LARGEx2"
has been selected in Surround Back Speaker setting.
1 Press the 5/∞ keys or MULTI @/# keys to select "SB SPAC-
ING" and press the MEMORY/ENTER key or the ENTER key.
receiver is ON.
receiver is OFF.
STEREO
Continued to next page.
£
25 EN