Step 12 - WCP Omio CNC Router Stand User Manual

Omio CNC Router Stand (Mobile Cart) -
User Guide (Rev 1)

Step 12

Flip the assembly right side up, as seen below. Align the Aluminum Cart Top with the
rivnuts in the top of the cart assembly. The counter bores in the aluminum sheet will be
facing the rivnuts. Use twelve #10-32 x 1/2"L BHCS to attach the sheet to the cart.
Note: If an enclosure is not to be installed, additional #10-32 x 1/2"L BHCS can be add-
ed into the unused holes�
Table of Contents Page 20
wcproducts.com