Step 1 - WCP SB 50 User Manual

Battery Mount (Vertical)- User Guide
(Rev 1)

Step 1

Depending on the desired assembly method, there are two options for the bolts and
spacers. Use the desired hardware for your application.
• Spacer Option - #10-32 x 2.5"L BHCS, #10-32 Nuts, and 2" Spacer
• Standoff Option - #10-32 x 1/2"L BHCS and 2" Threaded Hex Standoffs
Assemble all components in the desired locations. Below is just a recommendation for
locations and components.
Table of Contents
wcproducts.com
Page 6