Table of Contents
Advertisement
Omio CNC Router Stand (Mobile Cart) -
User Guide (Rev 1)
Assembly Note
Due to variations and differences in quality of the aluminum extrusion, WCP will install all
tube plugs into the ends of the tubing where they are required. We do this to ensure all
tube plugs fit correctly. Step 1 can be skipped as it will be completed before shipping.
When installing the 2" x 2" tube plugs, the following illustrations show the maximum
amount of bolts that can be added to each tube. We have provided the amount that is
necessary for the cart to be assembled correctly and more may be added if desired.
Each tube plug only requires two bolts per side as opposed to the three seen in Step
1. Additionally, only four bolts are needed to attach one tube to an adjacent tube as
opposed to five as seen in the remaining assembly steps.
Table of Contents
Page 6
wcproducts.com
Advertisement
Table of Contents
