Omio CNC Router Stand (Mobile Cart) -
User Guide (Rev 1)
Leveling Router Stand
After moving the Router Stand to desired location, the Router Stand can be locked into
place to prevent movement and can be leveled as well. The leveling process does not
require precision and is mainly to prevent the Router Stand from rocking as the machine
is operated.
To prevent movement, rotate the red knob located inside the caster. This knob will lower
or raise pad in the caster. Lower the pad till the wheel is lifted off the ground. Repeat this
step will the remaining casters. Ensure that each pad is touching the ground.
Table of Contents
Page 25
wcproducts.com