Bosch HPC 400 Operating Instructions Manual page 25

Menu item description
Heating Control of the room temperature for the
selected heating circuits during the holiday
period:
• With As Saturday, the heating system
runs in the selected heating circuits
every day in accordance with the time
program that is active for Saturday
(holiday at home).
• A Constant temperature can be
selected at will to be valid for the entire
holiday period for the selected heating
circuits.
• The Off setting deactivates the heating
system completely for the selected
heating circuits.
DHW DHW settings during the holiday period.
• If Off is set, no DHW at all will be
available during the holiday period.
• If Off + therm. disinfection on is set,
DHW heating is deactivated but thermal
disinfection is still carried out as normal
either once a week or once a day.
If you are spending your holiday at home, the
DHW system must not be selected under
Selection heat. circ./DHW, so as to ensure
that DHW remains available.
Delete Delete all settings for the selected holiday
program
Table 28 Settings for holiday programs
The following table shows you how to set up a holiday program, interrupt a holiday program that is active and delete a holiday
program.
Operating the appliance
Open the menu for the holiday program
▶ If the standard display is active, press the menu key briefly to open or close the main
menu.
▶ Turn the selector to highlight Holiday.
▶ Press the selector to open the Holiday menu.
▶ Turn the selector to highlight Holiday 1, 2, 3, 4 or 5. If the period of time has been set
for a holiday program, the start date is displayed in the menu.
▶ Press the selector.
If the period of time has already been set for the holiday program, the Holiday 1, 2, 3,
4 or 5 menu is displayed. If the period of time for the holiday program has not been
set, the start date and end date for the holiday program must be set. After this, the
Holiday 1, 2, 3, 4 or 5, menu is displayed.
Table 29 Setting up, interrupting or deleting a holiday program
HPC 400
CLIMATE CONTROL SYSTEMS
VOGEL NOOT
&
Working with the main menu | 25
Result
6 720 811 136-32.1O
6 720 817 986 (2015/07)