Table of Contents
Advertisement
The VF Flurry snow machine carries a one year (365 days) limited warranty. Please fill out the en-
closed warranty card to validate your purchase. All returned service items, whether under warranty
or not, must be freight pre-paid and accompanied by a return authorization (R.A.) number. The R.A.
number must be clearly written on the outside of the return package. A brief description of the prob-
lem as well as the R.A. number must also be written down on a piece of paper and included in the
shipping container. If the unit is under warranty, you must provide a copy of your proof of purchase
invoice. You may obtain an R.A. number by contacting our customer support number.
This device features a snow juice level sensor. When the snow juice level begins to run low, a bult-in
sensor inside the reservoir will automatically shut off the pump. This will prevent the pump from run-
ning dry, and therefore greatly increase the life of the pump.
This unit also includes a switch located on the rear panel that allows you to control the speed of the
air pump located inside the unit, thereby controlling the size of the flakes that are produced by the
machine. In the max position the air flow will be low, producing larger flakes. In the minimum position
the air flow will be higher, producing smaller flakes. The snow output volume is controlled using the
included remote control.
WARRANTY REGISTRATION
DESCRIPTION
5
Advertisement
Table of Contents
