Spectrum Analyzer Display Selection; Sub Spectrum Analyzer Display Selection - Kenwood DPX-4020 Instruction Manual

Spectrum Analyzer Display Selection

You can select the display to enjoy sounds with eyes.
Switching the Spectrum Analyzer Display:
1
Press the S.A button.
"SPEANA mode" is displayed once the analyzer mode is
entered.
2
Each time you press the S.A button, the analyzer display
switches as follows;
The spectrum analyzer display switches in
"SPEANA scan"
sequence for 10 seconds each.
∞
"Peak Hold"
∞
"Magnet"
∞
"Spark"
∞
"White Lines"
∞
"Amoeba"
∞
"Laser"
∞
"Strobo Light"
∞
"Frame"
∞
"Swing Line"
∞
"Mixer"
∞
"Rain Drop"
∞
"Landscape"
∞
"Seashore"
∞
"Speana Off"
3
Press the S.A button for at least one second to end the
analyzer mode.
NOTE
If you make no button operation for 10 seconds, the analyzer
mode is automatically canceled.

Sub Spectrum Analyzer Display Selection

Switching the Sub Spectrum Analyzer Display:
Press the S.A button for at least one second to the sub
analyzer display switches as follows;
∞
"Peak Level"
∞
"Vibroscope"
∞
"Canyon"
∞
"Peak Bound"
∞
"Champagne"
∞
"Wave"
∞
"Ripple"
∞
"Sub-Ana.Off"
∞
"Sub-Ana.Scan"
The sub spectrum analyzer display
∞
switches in sequence for 10 seconds each.
"EQ Curve"
— 9 —