Equalizer Level Adjusting; Spectrum Analyzer Display Selection - Kenwood DPX-4010 Instruction Manual

Preset Equalizer Select ion
You can choose the equalizer from four settings w hose sound
qualities are preset to m atch m usic or vehicle characteristics.
Sw itching the Preset Equalizer:
1
Press the EQ button.
"EQ mode" is displayed once the equalizer mode is entered.
2
Each time you press the EQ button, the preset equalizer
sw itches as follow s;
3 "Rock" 3 "Pops" 3 "Vocal" 3 "Heavy" 3 "Flat"
3
Press the EQ button for at least one second to end the
equalizer mode.
N OTE
If you make no button operation for 10 seconds, the equalizer
mode is automatically canceled.
Equalizer Level A djust ing
You can adjust the level of the equalizer effects.
1
Press the EQ button.
"EQ mode" is displayed once the equalizer mode is entered.
2
Each time you press the AM or FM button, the equalizer
effects sw itch as follow s;
3 3
"LOW" "M ID" "HIGH"
2 2
N OTE
• This adjustment cannot be made w hen the Preset Equalizer
Selection is set to "Flat".
• The default setting is "M ID".
3
Press the EQ button for at least one second to end the
equalizer mode.
N OTE
If you make no button operation for 10 seconds, the equalizer
mode is automatically canceled.
Spect rum A nalyzer D isplay Select ion
You can select the display to enjoy sounds w ith eyes.
Sw itching the Spectrum Analyzer Display:
1
Press the S.A button.
"SPEANA mode" is displayed once the analyzer mode is
entered.
2
Each time you press the S.A button, the analyzer display
sw itches as follow s;
The spectrum analyzer display sw itches in
"SPEANA scan"
sequence for 10 secconds each.
"Peak Hold"
"Squall"
"Catcher"
"Level M eter"
"Rolling Bar"
"Stream"
"Radar"
"Falling Star"
"M usic Scope"
3
Press the S.A button for at least one second to end the
analyzer mode.
N OTE
If you make no button operation for 10 seconds, the analyzer
mode is automatically canceled.
— 23 —