Pilot Rth; Landing; Hand Landing - Parrot ANAFI Ai User Manual

Pilot RTH

When the "Pilot" advanced RTH option is selected, ANAFI Ai comes back to the GPS position
of the device used to control the drone (whether linked to a Parrot Skycontroller 4 or not) at
the exact moment an RTH procedure is activated – or to the last known coordinates of the
device, in case it has lost GPS synchronization.
Note that when the Smart RTH function is activated in "Pilot" advanced RTH mode,
ANAFI Ai comes back to the GPS position of the device, at the moment of the
activation of the Smart RTH function – or to the last known coordinates of the device,
in case it has lost GPS synchronization.
L
ANDING
Fly ANAFI Ai directly over a flat, even, and clear surface, then press the
ANAFI Ai lands.

Hand landing

Be especially careful when you hand land ANAFI Ai. This procedure is safe provided you
are not distracted or startled by an outside event with a live drone approaching your
hand: concentrate on what you are doing, but always stay aware of your surroundings.
Both device and drone GPS synchronizations are mandatory for a successful hand landing.
Do not attempt a hand landing in a wind strong enough to make ANAFI Ai "fight" to hold
its hovering position.
The hand landing feature is deactivated in Cameraman mode: revert to Manual flight
before attempting a hand landing.
Fly ANAFI Ai between 100 cm (3 ft) and 150 cm (5 ft) directly above your open right hand,
arm extended.
Press the button of your Skycontroller 4: ANAFI Ai lands on your hand.
Setting up for landing
button:
37