Connecting The Speakers - JVC EX-A10 Instructions Manual

Connections (continued)

Connecting the speakers

There is no difference between the left and right speakers.
Speaker terminal
TWEETER
WOOFER
Right speaker
(rear panel)
• An incorrect connection may damage the speakers.
• The supplied speakers are dedicated to the supplied receiver as parts of the EX-A10 system. Do not
connect the supplied speakers to equipment other than the supplied receiver. Doing so may damage the
speakers.
CAUTION
• Do not short-circuit the ª and · speaker
terminals. Doing so may damage the receiver.
• Do not connect other speakers together with the
supplied speakers. The change in impedance
may damage the receiver and the speakers.
• Improper speaker cord connection spoils the
stereo effect and sound quality.
• The supplied speakers are magnetically
shielded, but color irregularity may occur on the
TV depending on some conditions. To prevent
color irregularity, set up the speakers following
the instructions below.
1. Turn off the main power of the TV before
setting up the speakers.
2. Place the speakers enough distance from the
TV so that they do not cause color irregularity
on the TV.
3. Wait for about 30 minutes before turning on
the main power of the TV again.
9
Speaker cord
TWEETER TWEETER
RIGHT RIGHT
WOOFER WOOFER
RIGHT RIGHT
Speaker cords
Receiver (rear panel)
(supplied)
Do not turn on the power until you complete the connection.
Speaker terminal
TWEETER
LEFT
WOOFER
LEFT
The speakers employ natural wood for the
diaphragm and the cabinet in order to
reproduce the original sound faithfully.
The appearance will therefore be different for
each system.
You can detach the speaker cover.
NOTE
• To allow the receiver and the DVD player to emit
generated heat, leave a space of at least 1 cm
between the receiver or the DVD player and the
speakers or other objects.
Before
connecting the
speaker cords,
twist and pull off
the insulation.
Speaker cord
TWEETER
LEFT
TWEETER
WOOFER
LEFT
WOOFER
Left speaker
(rear panel)
Speaker
cover