JVC EX-A10 Instructions Manual page 34

Convenient functions of the DVD player (continued)
3
Press the number buttons to
program chapters/tracks.
• Refer to "Using the number buttons"
(A page 15).
■Display on the DVD player for DVD VIDEO
• Select a title number, and then a chapter
number.
Title indicator
Title number Chapter number Program number
■Display on the DVD player for DVD AUDIO/
MP3/WMA disc
• Select a group number, and then a track
number.
Group
indicator Track indicator
Group
Chapter
number
number
■Display on the DVD player for VCD/SVCD/CD
• Select a track number.
• As you finish the track selection, the total
time for the program playback will be
displayed.
Track indicator
Track number Program number
Example:
TV screen for a DVD VIDEO
29
Chapter indicator
Program number
(Program screen)
• Before selecting a bonus group of a DVD
AUDIO, cancel the "BONUS" display as
explained in "Playing back the bonus group"
on page 34.
• When you try to enter more than 99
chapters or tracks, "MEMORY FULL"
appears.
• In the case of a VCD, SVCD or CD, when
the total playback time reaches 9 hours 59
minutes 59 seconds, "--:--" will be displayed
in the display window on the DVD player.
NOTE
• Only for a DVD VIDEO, DVD AUDIO, MP3, WMA
disc, if you press ENTER instead of specifying a
track/chapter number, "ALL" is displayed and all of
the tracks/chapters included in the selected group/
title are programmed.
4
Press 3 (play).
• To return to normal playback, press PLAY
MODE repeatedly to turn off "PRGM" (the
.
upper indicator) in the display window on
the DVD player while the disc is stopped.
The program content will not be erased.
• The following operations erase the program
content.
• Hold down CANCEL until "ALL CLEAR!"
appears in the display window while the
program screen is displayed on the TV
screen (if CANCEL is pressed and
released quickly, programs will be erased
one by one).
• Open the disc tray.
• Turn off the power.
(Only when the setting save function
(A page 31) is not being used)
.