Download  Print this page

JVC EX-D1B Instructions Manual

Compact component system
Hide thumbs

Advertisement

Table of Contents
COMPACT COMPONENT SYSTEM
EX-D5
Consists of CA-EXD5 and SP-EXD1
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial No.
which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
GVT0144-001A
[J]

Advertisement

Table of Contents
loading

  Also See for JVC EX-D1B

  Related Manuals for JVC EX-D1B

  Summary of Contents for JVC EX-D1B

  • Page 1 COMPACT COMPONENT SYSTEM EX-D5 Consists of CA-EXD5 and SP-EXD1 INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No.
  • Page 2 Warnings, cautions and others CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. ATTENTION Afin d’éviter tout risque d’électrocution, d’incendie, etc.: 1.
  • Page 3 LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND. CAUTION Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. For U.S.A This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 4 For Canada/pour le Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. For Canada/pour le Canada Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 5: Table Of Contents

    Table of contents Introduction About discs...3 Description of parts ...5 Getting started Using the remote control ...6 Putting the batteries in the remote control ... 6 Operating the TV using the remote control... 7 Connecting up ...8 Basic operations Playing discs ...12 Playback ...
  • Page 6: Special Cautions

    Special cautions Notes on handling 7 Important cautions Installation of the system • Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C (between 41°F and 95°F). • Leave sufficient distance between the system and the •...
  • Page 7: Introduction

    About discs Playable disc types This system has been designed to play back the following discs: DVD VIDEO, DVD AUDIO, VCD, SVCD, CD This system can also play back the following discs: • Finalized DVD-R/-RW discs recorded in the DVD VIDEO format.
  • Page 8: Disc Structure

    About discs (continued) Notes on all files • The system can only recognize and play files with one of the following extensions, which can be in any combination of upper and lower case; MP3: “.MP3”, “.mp3” • WMA: “.WMA”, “.wma” •...
  • Page 9: Description Of Parts

    Description of parts The numbers represent the page numbers. Front panel See “Display window” below. Behind the door PHONES * Connect headphones (not supplied) with a stereo mini plug. If the headphones are connected, the speakers and subwoofer will not produce any sound. Display window S V C DV D - A RESUME...
  • Page 10: Using The Remote Control

    Using the remote control The numbers represent the page numbers. FM/AM WIRELESS 15, 17 15, 32 19, 28 37, 38 37, 38 Putting the batteries in the remote control 13, 16 7, 13, 14, 16 15, 32 12, 17 25, 26 7, 15 If the range or effectiveness of the remote control decreases, replace the batteries.
  • Page 11: Operating The Tv Using The Remote Control

    This page is for when operating your TV using the remote control of this product. Operating the TV using the remote control WIRELESS Setting the manufacturer's code Slide the remote control mode selector to the TV side. Keep pressing down NOTE Keep pressing down TV until Step...
  • Page 12: Connecting Up

    Connecting up Connecting antennas Connecting AM loop antenna (supplied) Set up the AM loop antenna. Connect antenna cords. Main unit How to insert antenna cords (rear panel) LOOP Connect two antenna cords as described above. If the antenna cord is covered with vinyl on the tip, twist and pull the vinyl off and remove.
  • Page 13: Connecting Speakers

    Connecting up Connecting speakers There is no difference between the left and right speakers. Speaker terminal Speaker cord Speaker cord (supplied) SPEAKERS Without black line With black line Main unit (rear panel) Right speaker (rear panel) CAUTION • DO NOT connect more than one speaker to one speaker terminal.
  • Page 14: Connecting Other Devices

    Connecting up (continued) Connecting other devices This page is for when connecting the main unit with other devices. Connecting subwoofer With an amplifier-built-in subwoofer (not supplied), you can enjoy a more dynamic bass sound. Refer to the manual of the subwoofer for details. Amplifier-built-in subwoofer (not supplied) Connecting with other audio device...
  • Page 15: Connecting The Power Cord

    Connecting up Connecting with TV Supplied composite video cord Main unit COMPONENT VIDEO S-VIDEO VIDEO OUT CAUTION Connect the main unit directly with a TV (or a monitor) without routing through a VCR. Otherwise it may cause picture distortion while playing.
  • Page 16: Playing Discs

    Playing discs Playback • The power will be turned on when any of PLAY 3, WIRELESS, FM/AM, AUX, or 0 on the main unit and DVD/CD , WIRELESS, FM/AM, AUX, or 0OPEN/CLOSE on the remote control is pressed while the power is off. If any button other than 0 or 0OPEN/CLOSE is pressed, the source will also be changed (if there is a disc loaded, playback will start).
  • Page 17: To Switch The Display

    WIRELESS Display window during disc playback Ex.: When a DVD VIDEO is played S V C DV D Disc type Elapsed playing time Chapter number Ex.: When a DVD AUDIO is played S V C DV D - A Track number If “BONUS”...
  • Page 18: Select What You Want To Play By Using The Number Buttons

    Playing discs (continued) WIRELESS Select what you want to play by using the number buttons NOTE • Set the remote control mode selector to AUDIO before using the number buttons. • For a VCD or SVCD, this operation can be carried out when the disc is stopped, or during playback without the PBC function.
  • Page 19: Playing Back From A Position 10 Seconds

    Playing back from a position 10 seconds before (One Touch Replay) Press during playback. NOTE • This operation may not be carried out for some discs. • It is not possible to go back to the previous title. Slow Motion Playback Press SLOW or SLOW pause.
  • Page 20: To Change The Brightness Of The Display Window (Dimmer)

    Playing discs (continued) To change the brightness of the display window (DIMMER) Press DIMMER repeatedly. • Each time you press the button, the dimmer mode changes as follows: AUTO DIMMER: During the video source playback, the display window dims and the illumination automatically turns off.
  • Page 21 Playback Display of an MP3/WMA disc is described here as an example. For a JPEG disc, read “track” as “file”. NOTE When playing a disc containing both MP3/WMA and JPEG files, set one of them to be played, then turn on the system again (page 29).
  • Page 22: Resume Playback

    Resume Playback WIRELESS NOTE Set the remote control mode selector to AUDIO before using the number buttons. This system can store the stop point, and when you start playback again by pressing DVD/CD (even while on standby), it starts from the position where you have stopped—Resume Play.
  • Page 23: Select The Scene To Be Played

    Select the scene to be played WIRELESS NOTE Set the remote control mode selector to AUDIO before using the number buttons. Select the scene from the menu Press MENU or TOP MENU while the disc is stopped or during playback •...
  • Page 24: Program Playback/Random Playback

    Program Playback/Random Playback WIRELESS NOTE Set the remote control mode selector to AUDIO before using the number buttons. Play the disc in the desired order (Program Playback) It is possible to program a maximum of 99 chapters or tracks. The same chapter or track can be programmed more than once.
  • Page 25: Random Playback

    To program on the display window on the main unit, operate as follows: (1) Select a title/group using the number buttons. (2) Designate a chapter/track number using the number buttons. • Refer to “How to use the number buttons” (page 15). •...
  • Page 26: Repeat Playback

    Repeat Playback Refer to page 17 for Repeat Playback of MP3/WMA and JPEG files. Playing the title/chapter/ group/track/all tracks repeatedly (REPEAT) Press REPEAT during playback. • Each time you press the button, the Repeat mode and its indication change as follows: For DVD VIDEO Repeat items On the TV...
  • Page 27 Playing the designated part repeatedly (A-B Repeat Playback) Press ON SCREEN twice during playback. The menu bar (page 28) will be displayed. Press cursor to select Press ENTER. ∞ Press cursor to display Other Repeat modes can be selected here. For other Repeat modes, refer to “Playing the title/chapter/group/track/all tracks repeatedly (REPEAT)”...
  • Page 28: Other Convenient Functions

    Other convenient functions Selecting the subtitles (only for moving image) Press SUBTITLE during playback of a disc containing subtitles in several languages. Ex.: • Each time you press the button, the subtitle will be alternated between ON and OFF. Press cursor subtitle language.
  • Page 29: Enlarging The Picture (Zoom)

    Enlarging the picture (ZOOM) (only for moving image) Press ZOOM during playback or while paused. • Each time you press the button, the picture magnification will be changed. • (For a JPEG) You cannot change the picture magnification during slide-show playback.
  • Page 30: Creating Realistic Sound (3D Phonic)

    Other convenient functions (continued) WIRELESS Creating realistic sound (3D PHONIC) The two speakers produce an effect resembling surround-sound. Press 3D PHONIC during playback. Ex.: 3D PHONIC • Each time you press the button, the 3D PHONIC will be alternated as follows: ACTION : Suitable for action movies, sport programs or other lively...
  • Page 31: Functions Specific To Dvd Audio

    Functions specific to DVD AUDIO WIRELESS NOTE Set the remote control mode selector to AUDIO before using the number buttons. Advanced operations Playing the Bonus Group There are some DVD AUDIO discs with a special group, called “Bonus Group”, recorded. NOTE This operation can be carried out when “BONUS”...
  • Page 32: Using The Menu Bar

    Using the menu bar NOTE • Set the remote control mode selector to AUDIO before using the number buttons. • This operation can be carried out when there is a disc loaded. There are some functions that may not work while the disc is stopped. Press ON SCREEN twice.
  • Page 33: Preferences

    Preferences NOTE The playback status mark has the same meaning of the mark on the On-screen guide (page 15). The initial settings of the system can be changed according to the environment the system is used NOTE • Set the remote control mode selector to AUDIO before using the number buttons.
  • Page 34 Preferences (continued) AUDIO Items Contents ( DIGITAL Select an output signal type from the AUDIO following in accordance with the device OUTPUT connected to the digital audio output terminal (AV amplifier, etc.). (See the list below for the preference items and output signal.) PCM ONLY: Device corresponding only to linear PCM.
  • Page 35: Country/Area Codes

    Country/Area codes Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania Armenia Netherlands Antilles Angola Antarctica Argentina American Samoa Austria Australia Aruba Azerbaijan Bosnia and Herzegovina Barbados Bangladesh Belgium Burkina Faso Bulgaria Bahrain Burundi Benin Bermuda Brunei Darussalam Bolivia Brazil Bahamas Bhutan...
  • Page 36: Listening To A Radio Broadcast

    Listening to a radio broadcast WIRELESS NOTE Set the remote control mode selector to AUDIO before using the number buttons. Selecting a station Press FM/AM. Each time you press the button, FM and AM change alternately. Press 4/¢ to select the station (frequency).
  • Page 37: Tuning In To A Preset Station

    Tuning in to a preset station WIRELESS Presetting stations in the system allows you to easily tune in to a station. NOTE Set the remote control mode selector to AUDIO before using the number buttons. Presetting stations The system stores up to 30 FM stations and up to 15 AM stations.
  • Page 38: Using Usb Wireless Transmission

    Using USB wireless transmission WIRELESS You can enjoy music from your PC through the wireless connection. Remember you cannot send any signal or data to your PC from this system. IMPORTANT • Always set volume to “VOL MIN” when connecting or disconnecting the other equipment.
  • Page 39 Start the music application and play any music on your PC. • The PLAYER indicator on the transmitter flashes. USB WIRELESS TRANSMITTER POWER PLAYER Your PC music is transmitted to the system. Enjoy listening! How to install the driver (for Windows 98SE) For the first time the transmitter is connected, “Add New Hardware Wizard”...
  • Page 40 Using USB wireless transmission (continued) If noise comes during playback or playback is interrupted with the wireless connection, try either operation below: • press CHANNEL on the transmitter to search for another frequency. Each time you press CHANNEL, the frequency advances one channel up from CH 1 up to CH 13.
  • Page 41: Listening To The Sound Of Other Audio Device

    Listening to the sound of other audio device WIRELESS Connect the other audio device to this system in advance (page 10). Press AUX. The source changes to AUX. Play the other audio device. For details, refer to the manual of the device connected.
  • Page 42: Auto Standby

    Setting the various timer (continued) How the daily timer works: Once the daily timer has been set, the timer indicator and timer number indicator (1/2/3) are lit on the display window. Daily timer turns on the system at the same time everyday until the timer setting is canceled manually or another daily timer is activated.
  • Page 43: Sleep Timer

    Sleep Timer When the time you specify elapses, the system will be turned off by itself. Press SLEEP. Each time you press the button, the time indicated on the display window on the main unit changes (in minutes). Changing the time Reselect the time by pressing SLEEP repeatedly.
  • Page 44: Troubleshooting

    Troubleshooting When you encounter a problem that seems to be a fault, check the following points before contacting your JVC service center. Power source 7 Power does not come on. • The power cord is not connected to the main unit or an AC outlet.
  • Page 45: Language Codes

    Others 7 It is not possible to switch audio or subtitles between languages. • The disc does not contain 2 or more languages. → If only a single language is recorded on the disc, switching to another language is impossible (page 24). 7 No subtitle is displayed.
  • Page 46: Specifications

    Specifications General Power source: AC 120 V Power consumption: 25 W (in operation) 1.0 W (on standby) Weight: 3.0 kg (6.7 lbs) External dimensions 150 mm x 152 mm x 246 mm (W x H x D): DVD player Playable discs: DVD VIDEO, DVD AUDIO, VCD, SVCD, CD, CD-R/RW (CD, VCD, MP3, WMA, JPEG format), DVD-R/-RW (video format)
  • Page 49 2005 Victor Company of Japan, Limited 0605AIMMDWJEM...
  • Page 50 COMPACT COMPONENT SYSTEM SYSTEME DE COMPOSANTS COMPACT EX-D5 Consists of CA-EXD5 and SP-EXD1 Composée du CA-EXD5 et du SP-EXD1 INSTRUCTIONS MANUEL D’INSTRUCTIONS GVT0144-002A...
  • Page 51 Warnings, cautions and others / Mises en garde, précautions et indications diverses CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. ATTENTION Afin d’éviter tout risque d’électrocution, d’incendie, etc.:...
  • Page 52 LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND. CAUTION Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. For U.S.A This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 53 For Canada/pour le Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. For Canada/pour le Canada Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 54 Table of contents Introduction About discs...3 Description of parts ...5 Getting started Using the remote control ...6 Putting the batteries in the remote control ... 6 Operating the TV using the remote control... 7 Connecting up ...8 Basic operations Playing discs ...12 Playback ...
  • Page 55 Special cautions Notes on handling 7 Important cautions Installation of the system • Select a place which is level, dry and neither too hot nor too cold; between 5°C and 35°C. • Leave sufficient distance between the system and the •...
  • Page 56: Introduction

    About discs Playable disc types This system has been designed to play back the following discs: DVD VIDEO, DVD AUDIO, VCD, SVCD, CD This system can also play back the following discs: • Finalized DVD-R/-RW discs recorded in the DVD VIDEO format.
  • Page 57 About discs (continued) Notes on all files • The system can only recognize and play files with one of the following extensions, which can be in any combination of upper and lower case; MP3: “.MP3”, “.mp3” • WMA: “.WMA”, “.wma” •...
  • Page 58: Description Of Parts

    Description of parts The numbers represent the page numbers. Front panel See “Display window” below. Behind the door PHONES * Connect headphones (not supplied) with a stereo mini plug. If the headphones are connected, the speakers and subwoofer will not produce any sound. Display window S V C DV D - A RESUME...
  • Page 59: Using The Remote Control

    Using the remote control The numbers represent the page numbers. FM/AM WIRELESS 15, 17 15, 32 19, 28 37, 38 37, 38 Putting the batteries in the remote control 13, 16 7, 13, 14, 16 15, 32 12, 17 25, 26 7, 15 If the range or effectiveness of the remote control decreases, replace the batteries.
  • Page 60: Operating The Tv Using The Remote Control

    This page is for when operating your TV using the remote control of this product. Operating the TV using the remote control WIRELESS Setting the manufacturer's code Slide the remote control mode selector to the TV side. Keep pressing down NOTE Keep pressing down TV until Step...
  • Page 61: Connecting Up

    Connecting up Connecting antennas Connecting AM loop antenna (supplied) Set up the AM loop antenna. Connect antenna cords. Main unit How to insert antenna cords (rear panel) LOOP Connect two antenna cords as described above. If the antenna cord is covered with vinyl on the tip, twist and pull the vinyl off and remove.
  • Page 62 Connecting up Connecting speakers There is no difference between the left and right speakers. Speaker terminal Speaker cord Speaker cord (supplied) SPEAKERS Without black line With black line Main unit (rear panel) Right speaker (rear panel) CAUTION • DO NOT connect more than one speaker to one speaker terminal.
  • Page 63 Connecting up (continued) Connecting other devices This page is for when connecting the main unit with other devices. Connecting subwoofer With an amplifier-built-in subwoofer (not supplied), you can enjoy a more dynamic bass sound. Refer to the manual of the subwoofer for details. Amplifier-built-in subwoofer (not supplied) Connecting with other audio device...
  • Page 64 Connecting up Connecting with TV Supplied composite video cord Main unit COMPONENT VIDEO S-VIDEO VIDEO OUT CAUTION Connect the main unit directly with a TV (or a monitor) without routing through a VCR. Otherwise it may cause picture distortion while playing.
  • Page 65: Playing Discs

    Playing discs Playback • The power will be turned on when any of PLAY 3, WIRELESS, FM/AM, AUX, or 0 on the main unit and DVD/CD , WIRELESS, FM/AM, AUX, or 0OPEN/CLOSE on the remote control is pressed while the power is off. If any button other than 0 or 0OPEN/CLOSE is pressed, the source will also be changed (if there is a disc loaded, playback will start).
  • Page 66: To Switch The Display

    WIRELESS Display window during disc playback Ex.: When a DVD VIDEO is played S V C DV D Disc type Elapsed playing time Chapter number Ex.: When a DVD AUDIO is played S V C DV D - A Track number If “BONUS”...
  • Page 67: Select What You Want To Play By Using The Number Buttons

    Playing discs (continued) WIRELESS Select what you want to play by using the number buttons NOTE • Set the remote control mode selector to AUDIO before using the number buttons. • For a VCD or SVCD, this operation can be carried out when the disc is stopped, or during playback without the PBC function.
  • Page 68: Slow Motion Playback

    Playing back from a position 10 seconds before (One Touch Replay) Press during playback. NOTE • This operation may not be carried out for some discs. • It is not possible to go back to the previous title. Slow Motion Playback Press SLOW or SLOW pause.
  • Page 69: To Change The Brightness Of The Display Window (Dimmer)

    Playing discs (continued) To change the brightness of the display window (DIMMER) Press DIMMER repeatedly. • Each time you press the button, the dimmer mode changes as follows: AUTO DIMMER: During the video source playback, the display window dims and the illumination automatically turns off.
  • Page 70 Playback Display of an MP3/WMA disc is described here as an example. For a JPEG disc, read “track” as “file”. NOTE When playing a disc containing both MP3/WMA and JPEG files, set one of them to be played, then turn on the system again (page 29).
  • Page 71: Resume Playback

    Resume Playback WIRELESS NOTE Set the remote control mode selector to AUDIO before using the number buttons. This system can store the stop point, and when you start playback again by pressing DVD/CD (even while on standby), it starts from the position where you have stopped—Resume Play.
  • Page 72: Select The Scene To Be Played

    Select the scene to be played WIRELESS NOTE Set the remote control mode selector to AUDIO before using the number buttons. Select the scene from the menu Press MENU or TOP MENU while the disc is stopped or during playback •...
  • Page 73: Program Playback/Random Playback

    Program Playback/Random Playback WIRELESS NOTE Set the remote control mode selector to AUDIO before using the number buttons. Play the disc in the desired order (Program Playback) It is possible to program a maximum of 99 chapters or tracks. The same chapter or track can be programmed more than once.
  • Page 74 To program on the display window on the main unit, operate as follows: (1) Select a title/group using the number buttons. (2) Designate a chapter/track number using the number buttons. • Refer to “How to use the number buttons” (page 15). •...
  • Page 75: Repeat Playback

    Repeat Playback Refer to page 17 for Repeat Playback of MP3/WMA and JPEG files. Playing the title/chapter/ group/track/all tracks repeatedly (REPEAT) Press REPEAT during playback. • Each time you press the button, the Repeat mode and its indication change as follows: For DVD VIDEO Repeat items On the TV...
  • Page 76 Playing the designated part repeatedly (A-B Repeat Playback) Press ON SCREEN twice during playback. The menu bar (page 28) will be displayed. Press cursor to select Press ENTER. ∞ Press cursor to display Other Repeat modes can be selected here. For other Repeat modes, refer to “Playing the title/chapter/group/track/all tracks repeatedly (REPEAT)”...
  • Page 77: Other Convenient Functions

    Other convenient functions Selecting the subtitles (only for moving image) Press SUBTITLE during playback of a disc containing subtitles in several languages. Ex.: • Each time you press the button, the subtitle will be alternated between ON and OFF. Press cursor subtitle language.
  • Page 78: Enlarging The Picture (Zoom)

    Enlarging the picture (ZOOM) (only for moving image) Press ZOOM during playback or while paused. • Each time you press the button, the picture magnification will be changed. • (For a JPEG) You cannot change the picture magnification during slide-show playback.
  • Page 79: Creating Realistic Sound (3D Phonic)

    Other convenient functions (continued) WIRELESS Creating realistic sound (3D PHONIC) The two speakers produce an effect resembling surround-sound. Press 3D PHONIC during playback. Ex.: 3D PHONIC • Each time you press the button, the 3D PHONIC will be alternated as follows: ACTION : Suitable for action movies, sport programs or other lively...
  • Page 80: Functions Specific To Dvd Audio

    Functions specific to DVD AUDIO WIRELESS NOTE Set the remote control mode selector to AUDIO before using the number buttons. Advanced operations Playing the Bonus Group There are some DVD AUDIO discs with a special group, called “Bonus Group”, recorded. NOTE This operation can be carried out when “BONUS”...
  • Page 81: Using The Menu Bar

    Using the menu bar NOTE • Set the remote control mode selector to AUDIO before using the number buttons. • This operation can be carried out when there is a disc loaded. There are some functions that may not work while the disc is stopped. Press ON SCREEN twice.
  • Page 82: Preferences

    Preferences NOTE The playback status mark has the same meaning of the mark on the On-screen guide (page 15). The initial settings of the system can be changed according to the environment the system is used NOTE • Set the remote control mode selector to AUDIO before using the number buttons.
  • Page 83 Preferences (continued) AUDIO Items Contents ( DIGITAL Select an output signal type from the AUDIO following in accordance with the device OUTPUT connected to the digital audio output terminal (AV amplifier, etc.). (See the list below for the preference items and output signal.) PCM ONLY: Device corresponding only to linear PCM.
  • Page 84: Country/Area Codes

    Country/Area codes Andorra United Arab Emirates Afghanistan Antigua and Barbuda Anguilla Albania Armenia Netherlands Antilles Angola Antarctica Argentina American Samoa Austria Australia Aruba Azerbaijan Bosnia and Herzegovina Barbados Bangladesh Belgium Burkina Faso Bulgaria Bahrain Burundi Benin Bermuda Brunei Darussalam Bolivia Brazil Bahamas Bhutan...
  • Page 85: Listening To A Radio Broadcast

    Listening to a radio broadcast WIRELESS NOTE Set the remote control mode selector to AUDIO before using the number buttons. Selecting a station Press FM/AM. Each time you press the button, FM and AM change alternately. Press 4/¢ to select the station (frequency).
  • Page 86: Tuning In To A Preset Station

    Tuning in to a preset station WIRELESS Presetting stations in the system allows you to easily tune in to a station. NOTE Set the remote control mode selector to AUDIO before using the number buttons. Presetting stations The system stores up to 30 FM stations and up to 15 AM stations.
  • Page 87: Using Usb Wireless Transmission

    Using USB wireless transmission WIRELESS You can enjoy music from your PC through the wireless connection. Remember you cannot send any signal or data to your PC from this system. IMPORTANT • Always set volume to “VOL MIN” when connecting or disconnecting the other equipment.
  • Page 88 Start the music application and play any music on your PC. • The PLAYER indicator on the transmitter flashes. USB WIRELESS TRANSMITTER POWER PLAYER Your PC music is transmitted to the system. Enjoy listening! How to install the driver (for Windows 98SE) For the first time the transmitter is connected, “Add New Hardware Wizard”...
  • Page 89 Using USB wireless transmission (continued) If noise comes during playback through the wireless connection Press CHANNEL on the transmitter to change the frequency band. By pressing CHANNEL for more than 3 seconds, you can search for the available frequency band automatically.
  • Page 90: Listening To The Sound Of Other Audio Device

    Listening to the sound of other audio device WIRELESS Connect the other audio device to this system in advance (page 10). Press AUX. The source changes to AUX. Play the other audio device. For details, refer to the manual of the device connected.
  • Page 91: Auto Standby

    Setting the various timer (continued) How the daily timer works: Once the daily timer has been set, the timer indicator and timer number indicator (1/2/3) are lit on the display window. Daily timer turns on the system at the same time everyday until the timer setting is canceled manually or another daily timer is activated.
  • Page 92: Sleep Timer

    Sleep Timer When the time you specify elapses, the system will be turned off by itself. Press SLEEP. Each time you press the button, the time indicated on the display window on the main unit changes (in minutes). Changing the time Reselect the time by pressing SLEEP repeatedly.
  • Page 93: Troubleshooting

    Troubleshooting When you encounter a problem that seems to be a fault, check the following points before contacting your JVC service center. Power source 7 Power does not come on. • The power cord is not connected to the main unit or an AC outlet.
  • Page 94: Language Codes

    Others 7 It is not possible to switch audio or subtitles between languages. • The disc does not contain 2 or more languages. → If only a single language is recorded on the disc, switching to another language is impossible (page 24). 7 No subtitle is displayed.
  • Page 95: Specifications

    Specifications General Power source: AC 120 V Power consumption: 25 W (in operation) 1.0 W (on standby) Weight: 3.0 kg External dimensions 150 mm x 152 mm x 246 mm (W x H x D): DVD player Playable discs: DVD VIDEO, DVD AUDIO, VCD, SVCD, CD, CD-R/RW (CD, VCD, MP3, WMA, JPEG format), DVD-R/-RW (video format)
  • Page 96 EN, FR 2005 Victor Company of Japan, Limited 0605AIMMDWJEM...