Recording Only One Track - JVC CA-NXF30 Instructions Manual

Recording from a CD to a USB device (continued)
NOTE
• When you want to quit recording, press
When you press after [ENTER] is pressed in
7
step 6, sound having been recorded before
pressed is stored. After pressing
to disconnect the USB device, wait until the
"REC" indicator stops flashing and disappears.
• Do not operate the main unit when "PLEASE
WAIT..." is displayed on the TV screen or "WAIT"
is displayed in the display window. Wait until the
display disappears.
• If "NO USB" appears in the display window,
check the USB device or its connection.
• "CANT REC" appears in the display window if
recording cannot continue for some reason.
- The USB device may be connected
improperly. Check the connection.
- You may be trying to record write protected
tracks.
- You may be trying to record sound from a CD-
R or CD-RW. The Serial Copy Management
System (SCMS) protects copyright and allows
only first-generation digital copies from the
digitally recordable source. In short, you
cannot make "a copy of a copy".
- You may be trying to record more than the
limited number of recordable tracks. You can
record up to 999 tracks to a group and 4 000
tracks to a USB device.
- The number of tracks that can be recorded to
the root group may be limited on the USB
device. The number of tracks may have
exceeded the limitation. In this case, select
another group or create a new group.
• Changes to the volume and quality of the sound
during recording do not affect the recorded
sound or the recorded sound level.
• The following functions do not affect the
recorded sound: the treble/bass adjustment
function (page 13), speaker volume level
function (page 13), surround mode function
(page 13), headphone surround function (page
14) and clear voice function (page 14).
• When "RANDOM" is selected, operating this
function automatically cancels random playback.
49
CAUTION
• Do not bump or move the main unit while
.
7
is
7
• Do not disconnect the USB device during
, if you want
7
Instead of step 3 on page 48, start
playback of the desired track.
• You can use the number buttons,
• Finishing step 6 returns playback to the
NOTE
• You can also record only the desired track by
• When "RANDOM" is selected, operating this
Before proceeding to step 4 on page
48, program the desired tracks.
• Refer to steps 1 and 2 on pages 29 and 30 for
• The following procedure is the same as steps 4
recording sound. Such movement may interfere
with recording.
recording, as this may cause malfunction.

Recording only one track

select a track.
beginning of the current track and only that track
is recorded.
pausing the track instead of step 3 on page 48.
function automatically cancels random playback.
Recording programmed tracks
programming tracks.
to 6 on page 48.
or to
4 x