Preparation
Connecting the FM antenna
When radio reception with the supplied FM antenna is poor, or when using a communal antenna
Main unit (rear view)
Antenna cable
(not supplied)
Converter (not
supplied:
compatible with
300 C/75 C)
Depending on the radio reception conditions, an
FM feeder antenna (not supplied: compatible with
300 C) can be used. In this case, a converter (not
supplied) is required.
• When using an antenna other than those supplied for this system, refer to the operation manuals for the
antenna and converter for details of connection.
• When positioning the antennas, find the best position for reception while listening to an actual radio
program (refer to "Listening to FM radio" on page 16).
• You cannot receive an FM radio broadcast without the antenna connection.
5
Do not connect the power cable until all other connections have been made.
Main unit (rear view)
or
Coaxial cable
(not supplied)
FM antenna (supplied)
Stretch out the FM antenna to
the best position for radio
reception.
Communal
antenna terminal
Outdoor FM
antenna
(not supplied)