Adjusting The Picture Quality (Vfp) - JVC CA-NXF30 Instructions Manual

Convenient functions of disc/file playback (continued)
Adjusting the picture quality
(VFP)
■ When a disc/file is played back or paused
■ IMPORTANT
• Slide the remote control mode
selector to [SHIFT].
1
Press [VFP].
• The current settings are displayed.
Example: TV screen for the VFP mode
Selected VFP mode
2
Press or (cursor) to select the
2 3
video fine processor (VFP) mode.
• Each time you press
mode changes on the TV screen as follows.
- "NORMAL"
For normal playback. (You cannot adjust
the image quality.) Go to step 7.
- "CINEMA"
Suitable for viewing a movie in a dim room.
(You cannot adjust the image quality.)
Go to step 7.
- "USER1/USER2"
You can adjust the image quality.
Go to step 3.
33
or (cursor), VFP
2 3
For the locations of the remote
control buttons, refer to page 29.
3
Press or (cursor) to select the
5 K
item you want to adjust.
• Each time you press
item changes on the TV screen as follows.
- "GAMMA"
Controls the brightness of neutral tints
while maintaining the brightness of dark
and light portions.
(Setting range: –3 to +3)
- "BRIGHTNESS"
Controls the brightness of the display.
(Setting range: –8 to +8)
- "CONTRAST"
Controls the contrast of the display.
(Setting range: –7 to +7)
- "SATURATION"
Controls the saturation of the display.
(Setting range: –7 to +7)
- "TINT"
Controls the tint of the display.
(Setting range: –7 to +7)
- "SHARPNESS"
Controls the sharpness of the display.
(Setting range: –8 to +8)
4
Press [ENTER].
Example: TV screen for "GAMMA"
5
Press or (cursor) to change
5 K
the value.
6
Press [ENTER].
• To adjust other items, go back to step 3.
7
Press [VFP].
NOTE
• It is recommended that you slide the remote
control mode selector to [AUDIO] after using this
function. Most of the other functions can be used
when the remote control mode selector is at
[AUDIO].
• If no operation is made for several seconds
during the procedure, the settings made so far
are automatically stored.
• When the [HDMI MONITOR OUT] terminal is
connected, this function does not affect the
picture quality.
or (cursor), the
5 K