SiSG121917E
3.1.2 Method 2
1. Press the center of Temp button and Mode button at the same time.
2. Select 5C (service check) with Temp or Temp button.
3. Press Mode button to enter the service check mode.
4. Press Temp or Temp button and change the number until you hear the two
5. Diagnose by the sound.
Part 6 Service Diagnosis
5C is displayed on the LCD.
The left-side number blinks.
consecutive beeps or the long beep.
Beep: The left-side number does not correspond with the error code.
Two consecutive beeps: The left-side number corresponds with the error code but the
right-side number does not.
Service Diagnosis
R6000648
R6000109
R6000649
R6000111
R6000650
108