Daikin MKS-T Series Service Manual page 77

SiSG121917E
 Schedule Settings
Part 4 Functions and Control
Operation
1
Schedule 2/2
Enable/Disable
Schedule nr set
Holidays
Settings
Return Setting
2
Schedule nr 1
Time Act Cool Heat
– – :– – – –
Mon
– –
– – :– – – –
– –
– – :– – – –
– –
– – :– – – –
– –
– – :– – – –
– –
Return Setting
3
Schedule nr 1
Time Act Cool Heat
– 6 :00 – –
Mon
– –
– – :– – – –
– –
– – :– – – –
– –
– – :– – – –
– –
– – :– – – –
– –
Return Setting
Schedule nr 1
Time Act Cool Heat
Mon – 6 :00 – –
– –
– – :– – – –
– –
– – :– – – –
– –
– – :– – – –
– –
– – :– – – –
– –
Return Setting
4
Schedule nr 1
Time Act Cool Heat
– 6 :00 – –
Mon
– –
– – :– – – –
– –
– – :– – – –
– –
– – :– – – –
– –
– – :– – – –
– –
Return Setting
Schedule nr 1
Time Act Cool Heat
Mon – 6 :00 ON 28°C 21°C
– – :– – – –
– –
– – :– – – –
– –
– – :– – – –
– –
– – :– – – –
– –
Return Setting
Schedule nr 1
Time Act Cool Heat
– 6 :00 ON 28°C 21°C
Mon
– 8 :00 OFF – – °C
–
– – :– – – –
– –
– – :– – – –
– –
– – :– – – –
– –
Return Setting
• Press the Menu/Enter button and display the
Schedule screen.
• Press " " buttons to select
Press Menu/Enter button to display the Schedule
screen.
NOTE: The Schedule Settings of the selected
schedule number can be changed. To change the
schedule number refer to "Schedule Nr Set"
• Press " " buttons to select the day of the week
to be set.
• Set the time for the selected day.
• Press " " buttons to move the highlighted item
and press " " buttons to set the desired time.
Each press of " " buttons moves the numbers
by 1 hour or 1 minute.
• Press the " " buttons to move the highlighted
item and press " " buttons to configure ON/
OFF/-- settings.
--, ON, or OFF changes in sequence when "
buttons are pressed.
"Act" column:
ON : The set temperature can be configured.
OFF: The setback temperature can be configured.
– – : The set temperature and setback
temperature become disabled.
• The cooling and heating set temperature for both
ON and OFF (Setback) are configured.
"Cool" and "Heat" column:
" _ " : Indicates that the set temperature and
setback temperature for this time period is
not specified. The last active set temperature
will be utilized.
" -- : Indicates that the setback function is "
disabled for this time period.
MSP Duct Type Functions
Settings .
"
72