Additional Safety Instructions; Technical Data; Unpacking - Scheppach HL760LS Translation Of The Original Instruction Manual

6. Additional safety instructions

• The log splitter may only be operated by one per-
son.
• Never split logs containing nails, wire, or other for-
eign objects.
• Already split wood and wood chips can be danger-
ous. You can stumble, slip or fall down. Keep the
working area tidy.
• While the machine is switched on, never put your
hands on moving parts of the machine.
• Only split logs with a maximum length of 52 cm.
Warning! This electric tool generates an electro-
magnetic field during operation. This field can im-
pair active or passive medical implants under cer-
tain conditions. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operat-
ing the electric tool.
Remaining hazards
The machine has been built using modern tech-
nology in accordance with recognized safety
rules. Some remaining hazards, however, may
still exist.
• The splitting tool can cause injuries to fingers and
hands if the wood is incorrectly guided or support-
ed.
• Thrown pieces can lead to injury if the work piece
is not correctly placed or held.
• Injury through electric current if incorrect electric
connection leads are used.
• Even when all safety measures are taken, some
remaining hazards which are not yet evident may
still be present.
• Remaining hazards can be minimized by following
the safety instructions as well as the instructions in
the chapter Authorized use and in the entire oper-
ating manual.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Release the handle button and switch off the ma-
chine prior to any operations.
• Avoid accidental starts of the machine: Do not
press the start button while inserting the plug into
the socket.
• Use the tools recommended in this manual to ob-
tain the best results from your machine.
• Always keep hands away from the work area when
the machine is running.

7. Technical data

Dimensions L x W x H
Wood ø min. - max.
Wood length min. - max.
Weight without base frame
Motor
Input P1
Output P2
Rating
Splitting Power
Cylinder rise
Cylinder speed (fast fwd.)
Cylinder speed (return)
Hydraulic fluid capacity
Operating pressure
Motor speed
Drehzahl
Noise
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.
Characteristic noise emission values
sound power level L
sound pressure level L
uncertainly K
*S3, periodic intermittent operation without influence
of the starting process on the motor heating. Identical
duty cycles with a period at load followed by a peri-
od at no load. Running time 10 minutes; duty cycle is
25% of the running time.
Pressure:
The performance level of the built-in hydraulic pump
can reach a short-term pressure level for a splitting
force of up to 7 tons. In the basic setting, hydraulic
splitters are set at the factory to an approx. 10% low-
er output level. For safety reasons, the basic settings
must not be changed by the user. Please note that
external circumstances such as operating and ambi-
ent temperature, air pressure and moisture affect the
viscosity of the hydraulic oil. In addition, manufactur-
ing tolerances and maintenance errors can affect the
reachable pressure level.

8. Unpacking

• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the
packaging and transport bracing (if available).
www.scheppach.com
1160 x 425 x 610 mm
50 - 250 mm
200 - 520 mm
230 V~ / 50 Hz
3,08 cm/sec
5,29 cm/sec
2800 1/min
96 dB (A)
WA
89,9 dB (A)
pA
3 dB
WA/pA
59 kg
64 kg
2200 W
1700 W
S3 25%
max. 7 t
370 mm
3,5 l
208 bar
GB | 23