Subscribe to Our Youtube Channel
Related Manuals for Leadshine M860C
Summary of Contents for Leadshine M860C
- Page 1 V20200069 Laser Autofocus Sensor Kit Instruction Manual Read carefully before use & keep for future reference.
- Page 2 Safety Information Warning • This machine works with lasers which can lead to serious injuries or property damage if used improperly: • DO NOT operate lasers around combustible or explosive materials. • DO NOT place bodily parts in the path of the laser. •...
- Page 3 Installation 1. Install the autofocus sensor on the laser head, making sure the bottom of the sensor is 5–10 mm lower than the bottom of the laser head. 2. Install and affix the motor in the hole near the Z-axis lifting transmission belt at the bottom of the engraving machine.
- Page 4 After the settings are complete, select the autofocus function on the laser engraver control panel menu and test it. Maintenance • Periodically clean the field lens of the laser, especially if the engraving quality becomes noticeably poorer. • Periodically clean the workbench with 75% isopropyl alcohol. •...
Need help?
Do you have a question about the M860C and is the answer not in the manual?
Questions and answers