jbc DDU Instruction Manual page 6

MSE Initial Set up*
1. After connecting the module, enter the
Peripherals Menu and select the port which
you want to join with the module.
2. Select the module from the list of peripheral
connections. Remember your first connection
is denoted as "a", the second being "b", etc.
(e.g. MS_a, MS_b,...).
3. Press Menu or Back to save changes.
Pedal Initial Set up*
1. Enter the Peripherals Menu and select the
port which you want to join to the pedal.
Peripherals
Pedal
Module
3. Set the pedal function according to your work needs:
Select how the pedal
acts: as Sleep,
Extractor (hibernation)
or as a module switch.
Select the activating
mode of the pedal
(pressed/released)
*Ref. MSE-A and P-005 (Not included)
**NB: The same can be applied inversely when continually pressing the pedal and releasing to activate.
6
17:14
Port 2-PA
PD_a
MSE
Peripherals
Pedal
Function
Mode
Minimum time
Back
Peripherals
Pedal
Module
2. Select the pedal from the list (Note that your
first connection is denoted as "a", the second
being "b", etc. (e.g. PD_a, PD_b,...).
Peripherals
Pedal
Module
17:14
Port 2-PA
PD_a
Extractor
released
0 sec
17:14
Port 2-DR
None
Module
None
MSE_a
None
17:14
Port 2-PA
PD_a
Pedal
MSE
PD_a
PD_b
None
Set the duration
of the activation
time when pressing
the pedal once**.
For continuous
functioning keep the
pedal pressed.