Table of Contents
Advertisement
All manuals and user guides at all-guides.com
13/18
7 Pattern Mode
Use the controls on the top right of the screen to control the Chute.
Select left or right with the circular buttons.
Note: To calibrate the centre position you would need to click on the symmetry
reading while a program key is inserted.
8 Air Gate Mode
Use the controls on the top right of the screen to control the Air Gate.
When vehicle is stationary click on left or right button to toggle between two
materials, and automatically set the operation gate to the calibrated gate for the
material selected.
Bosch Rexroth Canada ı 07.22.2013 ı Revision 2.0
Advertisement
Table of Contents
