All manuals and user guides at all-guides.com
Press the Gate Position again to verify the selection.
3.7 Error Messages
During the operation when an error occurs, a message will appear in the centre of
the screen. Tap anywhere on the message to clear the window.
4
Symbol Actions
All symbols on the right of the screen require a press and hold for >1 seconds.
Err/Diag
Unload
USB
4 4 4 4 .1 .1 .1 .1 Error
Error
Error Log
Error
Log/Diagnostic
Log
Log
/Diagnostic
/Diagnostic
/Diagnostic
When the vehicle is stationary press the
messages. If a hydraulic pressure&temperature sensor is connected both readings
will be displayed on the bottom right of the screen.
Bright/Vol Cylinder
Lock
'Gear' ' ' '
'Gear
'Gear
'Gear
symbol to display most recent error
Bosch Rexroth Canada ı 07.22.2013 ı Revision 2.0
7/18